[AZ-Observing] Re: MikeZ: looking for Superwedge pier plate designs
- From: "Ken Sikes" <kengsikes@xxxxxxx>
- To: <az-observing@xxxxxxxxxxxxx>
- Date: Wed, 29 Feb 2012 17:54:03 -0700
Contact Beevo as he has a fairly well stocked machine shop and has made many
piers, telescope saddles, and mounting plates for various scopes
Ken Sikes
----- Original Message -----
From: "Mike Zele" <mikezele@xxxxxxxxxxx>
To: <az-observing@xxxxxxxxxxxxx>
Sent: Tuesday, February 28, 2012 7:44 PM
Subject: [AZ-Observing] MikeZ: looking for Superwedge pier plate designs
Can anyone share their Superwedge pier plate designs with me? I am
looking to have a machinist make a set of pier plates (two plates) that can
hold my LX200 Classic 10" SCT on a Superwedge that will be mounted on top of
a 10-12" diameter cement pier post. I have seen some quick sketches online
that show the location of the Superwedge holes but I have not seen anything
detailed enough that I could hand over to a machinist to get the plates made
for me.
I would greatly appreciate any help you can give!
MikeZ
tel. 1-602-944-7919
www.funinaltaz.weebly.com
--
See message header for info on list archives or unsubscribing, and please
send personal replies to the author, not the list.
--
See message header for info on list archives or unsubscribing, and please
send personal replies to the author, not the list.
Other related posts:
