[AZ-Observing] Firmware upgrade
- From: "Peter Argenziano" <pargenz@xxxxxxx>
- To: "AZ-Observing" <az-observing@xxxxxxxxxxxxx>
- Date: Sat, 31 Dec 2005 11:40:29 -0700
For anyone on this list who uses the Argo Navis DSC computer, Wildcard
Innovations has just released the long-awaited firmware upgrade (v2.0.0).
It is available for download from their website, as is the most recent User
Manual (edition 7).
The firmware upgrade takes about 30 minutes to transfer to the AN unit, so
you'll want to ensure you have a fresh set of batteries installed before
initiating the upgrade. In addition to the firmware file (navis_app200.sgz)
you will need the Argonaut software utility, which can also be downloaded
from their website. The AN serial cable (pn-ser-cbl) is also required.
Have your product registration number handy to begin the file download.
Get the new firmware file here:
http://www.wildcard-innovations.com.au/firmware.html
Note: before performing the upgrade copy all of your specific settings from
MODE SETUP, as these will all be reset to factory values.
Peter
--
See message header for info on list archives or unsubscribing, and please
send personal replies to the author, not the list.
Other related posts:
- » [AZ-Observing] Firmware upgrade
