It's still wrong when I type it manually. I give up.You should be able to find
it on the Celestron Support pages.Sorry.Bill
From: Bill Powell <dmarc-noreply@xxxxxxxxxxxxx>
To: "az-observing@xxxxxxxxxxxxx" <az-observing@xxxxxxxxxxxxx>
Sent: Sunday, October 30, 2016 8:27 AM
Subject: [AZ-Observing] Re: Celestron CPC- 800 Problem
Dang!!!! I don't know what is going on with the upload of my response, but the
link is again incorrect.Go to the Celestron website under Support, Manuals and
Software and you should be able to find the firmware update link.the last part
of the link I sent should be:"KnowledgebaseCategory(461" (without the quotation
marks)Sorry for the confusion.Bill
   From: Bill Powell <dmarc-noreply@xxxxxxxxxxxxx>
To: "az-observing@xxxxxxxxxxxxx" <az-observing@xxxxxxxxxxxxx>
Sent: Sunday, October 30, 2016 8:19 AM
Subject: [AZ-Observing] Re: Celestron CPC- 800 Problem
Â
The link I sent is not correct. This is the
link:http://www.celestron.com/support/manuals-software/files?KnowledgebaseCategory(461My
cut-and-paste is working strangely today for some reason.:-)Bill
   From: Bill Powell <dmarc-noreply@xxxxxxxxxxxxx>
To: "az-observing@xxxxxxxxxxxxx" <az-observing@xxxxxxxxxxxxx>
Sent: Sunday, October 30, 2016 8:13 AM
Subject: [AZ-Observing] Re: Celestron CPC- 800 Problem
Â
Good morning. I have a Celestron CG-5 mount an had a similar problem awhile
back. Here are my recommendations:1. Disconnect all power and let sit for a
minute or two.2. Verify all cables are plugged into the correct receptacles.3.
Power up the scope and see if the problem still exists. If it does, proceed
with #4.
4. Your unit may need to be reprogrammed. This can be done using the Celestron
Firmware Manager. The software can be downloaded from Celestron at:
http://www.celestron.com/support/manuals-software/files?KnowledgebaseCategory(461
The process is not too difficult, but the steps need to be followed
carefully.Hope this helps.Bill
   From: "dmarc-noreply@xxxxxxxxxxxxx" <dmarc-noreply@xxxxxxxxxxxxx>
To: az-observing@xxxxxxxxxxxxx
Sent: Sunday, October 30, 2016 6:15 AM
Subject: [AZ-Observing] Celestron CPC- 800 Problem
Â
Good Morning All,
Early this summer I bought a new Celestron CPC-800. This evening when I
powered it up I got the message "Boot Loader Serial Invalid Pkg. :0002 and the
hand paddle is inoperative.
  Any ideas? Len Liszewski
-----Original Message-----
From: Steve Coe <dmarc-noreply@xxxxxxxxxxxxx>
To: az-observing <az-observing@xxxxxxxxxxxxx>
Sent: Tue, Oct 25, 2016 3:01 pm
Subject: [AZ-Observing] Re: Zodiacal light and gegenscheinLast year I bought a
new Celestron CPC-800 8" Telescope. This evening when I powered it up I got
the message "Boot Loader Serial Invalid Pkg. :0002 and the hand paddle is
inoperative.
  Any ideas? Len Liszewski
 Â
Brian, et al;
As you said, this is a great time of year for spotting the zodiacal light, I
have pointed it out several times to other observers from the Antennas site.Â
I also like the fact that that it is in Aries and Pisces, so there are few
bright stars and it stands out better than in the Spring, when it is in Leo and
Virgo.
Glad to hear that you are studying NGC 457, a favorite of mine and AJ's.Â
Every time I observe in Cassiopeia, I spend some time viewing it.
Have fun;Steve Coe
  On Monday, October 24, 2016 11:00 AM, Brian Skiff <bas@xxxxxxxxxx> wrote:
This is a somewhat annual reminder that the gegenschein
is now in a good spot in the sky to go out and look for it.
  Here are some recent images of it taken in
late-evening from the Lowell Anderson Mesa site:
ftp://ftp.lowell.edu/pub/bas/20161022-gegen.jpg
ftp://ftp.lowell.edu/pub/bas/20161023-gegen.jpg
...and an image from a couple weeks ago of the
morning zodiacal light:
ftp://ftp.lowell.edu/pub/bas/20161014_zodi.jpg
These were all cloud-free nights, so all the
structure you see in the sky background is from
the night-airglow (i.e. actually in the foreground).
The airglow has been active enough that one of our
DCT telescope operators thought they were cirrus clouds.
SQM meter readings were ~0.3 mag brighter than values
typical when the airglow is quiescent.
  The annotations in the images show bright stars
but also mark the locations of the telescopes active
at the time the image was taken. Thus on the Oct 22 image,
I was using our 1.8-m Perkins telescope to get polarimetry
of Be stars NGC 457, while our robotic 31-inch telescope
was hitting one of a long list of T Tauri stars between
the Pleiades and Hyades.
\Brian
--
See message header for info on list archives or unsubscribing, and please
send personal replies to the author, not the list.
Â
--
See message header for info on list archives or unsubscribing, and please
send personal replies to the author, not the list.
--
See message header for info on list archives or unsubscribing, and please
send personal replies to the author, not the list.
Â
--
See message header for info on list archives or unsubscribing, and please
send personal replies to the author, not the list.
Â
--
See message header for info on list archives or unsubscribing, and please
send personal replies to the author, not the list.
Â
--
See message header for info on list archives or unsubscribing, and please
send personal replies to the author, not the list.
--
See message header for info on list archives or unsubscribing, and please
send personal replies to the author, not the list.