The problem with using MS-Word is that so much resolution is lost because it only outputs at max 300dpi. In some cases where the screen contains very small writing this resolution is just not adequate for the purpose. So it's not about how you catch the screen but how you output to paper. If you want paper, that is. Matthew -----Original Message----- From: austechwriter-bounce@xxxxxxxxxxxxx [mailto:austechwriter-bounce@xxxxxxxxxxxxx] On Behalf Of Helen Haywood Sent: Wednesday, 18 June 2008 11:37 AM To: austechwriter@xxxxxxxxxxxxx Subject: atw: Developing Training manuals. Content-Type: text/plain; charset=3D"us-ascii" Content-Transfer-Encoding: 7bit =20 Does any one have advice on what software is the most effective and affordable to capture screen shots and generate the steps and keystrokes to help develop IT training manuals in WORD ? I have used INFOPAK and would not consider it again. It's too expensive, cumbersome and has a complete disrespect for Styles. =20 Regards =20 Helen Haywood =20 ************************************************** To view the austechwriter archives, go to www.freelists.org/archives/austechwriter To unsubscribe, send a message to austechwriter-request@xxxxxxxxxxxxx with "unsubscribe" in the Subject field (without quotes). To manage your subscription (e.g., set and unset DIGEST and VACATION modes) go to www.freelists.org/list/austechwriter To contact the list administrator, send a message to austechwriter-admins@xxxxxxxxxxxxx ************************************************** ************************************************** To view the austechwriter archives, go to www.freelists.org/archives/austechwriter To unsubscribe, send a message to austechwriter-request@xxxxxxxxxxxxx with "unsubscribe" in the Subject field (without quotes). To manage your subscription (e.g., set and unset DIGEST and VACATION modes) go to www.freelists.org/list/austechwriter To contact the list administrator, send a message to austechwriter-admins@xxxxxxxxxxxxx **************************************************