Hi Dean,
This is just my two bits worth, but if your voice is louder than jaws, it's
probably that the volume of jaws needs to be turned up a bit. You can adjust
this the way you normally do in jaws. Good luck.
Mike
P.S.
Although I don't podcast often, when I need to record my voice and the
screen reader, I generally use Virtual Audio Cable. But that might be a bit
much to go through for some.
Do you like disco? Do you like to shake your groove with New Wave, 90s Hip
hop, Or today's slammin hits? If so, check out my show every Wednesday night
from 7 to 10 pm Eastern on Sonic Radio:
www.sonicradio.rocks <http://www.sonicradio.rocks>
From: audacity4blind-bounce@xxxxxxxxxxxxx
[mailto:audacity4blind-bounce@xxxxxxxxxxxxx] On Behalf Of Dean Martineau
Sent: Saturday, April 17, 2021 3:07 PM
To: audacity4blind@xxxxxxxxxxxxx
Subject: [audacity4blind] recording a screen reader demo with Auydacity
Hello. I've just started using Audacity 3.0, and I want to record a demo
with my voice and one or more screen readers. I have great hopes for this,
I'd rather not buy an audio interface or a mixer. I understand this is
supposed to work.
When I turn Windows Wasavi on, my voice still sounds adequate, but JAWS is
very faint and distorted. I'm using a USB mic and JAWs is coming through the
same channel.
Can this be done?
Thanks.
Dean
Thought-provoking reading: http://bahaiteachings.org
<http://bahaiteachings.org/>
