Hi Brad, to find the peak amplitude in a track, you can use the amplify effect dialog. 1. Select the audio in the track. (select the track, and then press j followed by shift+k). 2. Open the amplify effect on the effect menu. 3. When this opens, then the value in the amplitude (db) edit box show the amount of amplification needed so that the peak value would be maximum (0 db). So if it was 15, then the peak in the track is 15db below maximum. 4. press esc to close the dialog without applying the effect. Reading the timeline: you can read the position of the cursor/selection start by pressing left bracket when there's no playback. A dialog opens which give the time. Similarly you can read the end of a selection by pressing right bracket when there's no playback. You appear to be using an old version of audacity, that is 1.3.14 alpha. Is there any reason why you're not using the current version (2.0.5)?. As far as I'm aware this should be ok on a mac. David. -------------------------------------------- On Tue, 5/11/13, Brad Erhardt <brad.erhardt@xxxxxxxxx> wrote: Subject: [audacity4blind] amplitude and time line To: audacity4blind@xxxxxxxxxxxxx Date: Tuesday, 5 November, 2013, 1:33 Hello all again, does anyone know if it is possible for us blinkers, :-) Visually impaired or blind people, to know the peak amplitude for an existing track. Also is there a way to read the time line. I believe Audacity shows these things visually. I am using Audacity 1.3.14 alpha on a macintosh system running OS X lion. TTFN, Brad Erhardtbrad.erhardt@xxxxxxxxx The audacity4blind web site is at //www.freelists.org/webpage/audacity4blind Subscribe and unsubscribe information, message archives, Audacity keyboard commands, and more... To unsubscribe from audacity4blind, send an email to audacity4blind-request@xxxxxxxxxxxxx with subject line unsubscribe