[audacity4blind] Re: Simple problem with Deleting and Recording

  • From: "Andrew Downie" <access_tech@xxxxxxxxxxxxxx>
  • To: <audacity4blind@xxxxxxxxxxxxx>
  • Date: Tue, 1 Sep 2020 18:33:43 +1000

Hi Trevor

Don’t worry, we’ve all (well, certainly me) have all fallen for similar traps.

One thing that irritated me about Windows 10 was that sound card settings 
became harder to get to than previously.  The solution is to press Windows 
key+r to open the run dialog.  Write mmsys.cpl and press Enter and that will 
take you to sound settings.  You will land on the list of sound devices in the 
playback tab.  Press shift+tab to get to the playback tab and use left/right 
arrows to move through the other tabs.  The recording tab is the one for 
checking mic settings.

 

 

Andrew

 

 

From: audacity4blind-bounce@xxxxxxxxxxxxx <audacity4blind-bounce@xxxxxxxxxxxxx> 
On Behalf Of tattenberg@xxxxxxxxx
Sent: Tuesday, 1 September 2020 4:24 AM
To: audacity4blind@xxxxxxxxxxxxx
Subject: [audacity4blind] Re: Simple problem with Deleting and Recording

 

Fantastic! Both worked! Shift + C works now. And in fact it seems my mic was 
muted somehow. I don’t know how it got muted, but I tested in Voice Recorder 
(forgot about that), then I tinkered with sound settings until it started 
working. I’m not sure what I did to get the mic working, but it seems to now, 
including in Audacity. Sorry – I guess I’ve been pretty incompetent about PC 
mic related stuff.

You’ve been great. Take it easy!

😊

Trevor 

 

From: audacity4blind-bounce@xxxxxxxxxxxxx 
<mailto:audacity4blind-bounce@xxxxxxxxxxxxx>  
<audacity4blind-bounce@xxxxxxxxxxxxx 
<mailto:audacity4blind-bounce@xxxxxxxxxxxxx> > On Behalf Of Andrew Downie
Sent: Monday, August 31, 2020 6:02 PM
To: audacity4blind@xxxxxxxxxxxxx <mailto:audacity4blind@xxxxxxxxxxxxx
Subject: [audacity4blind] Re: Simple problem with Deleting and Recording

 

Hi Trevor

I think I can solve the shift+c issue.  Audacity, for a reason that completely 
escapes me, does not turn on all keyboard commands by default.  With the 
standard setting, shift+c does not do anything.  Open Preferences with 
control+p.  Press k for keyboard.  Tab until you reach the Defaults button.  
Press spacebar and arrow to full and press Enter.  Then tab to ok and press 
Enter again.

Glad you have discovered the peak level meters, as they are most helpful.  Note 
that with the record meter if you are not yet recording you need to press the 
Application key and arrow to Start Monitoring.  Furthermore, with JAWS you have 
to tab away from the meter and back to read a change.  

I wonder if the mic has become muted.  I just checked and, with it muted, 
Audacity will still show a decent level.  Worth checking under the record tab 
in sounds to see if it is muted.  Also try recording something with Voice 
Recorder.  And also worth checking in the input dialog in Audacity to make sure 
there is not another input option.

I wondered about headphones interfering.  I tried with my notebook and, 
somewhat to my surprise, with earphones connected Audacity accepted input from 
the inbuilt mic.

 

 

Andrew

 

From: audacity4blind-bounce@xxxxxxxxxxxxx 
<mailto:audacity4blind-bounce@xxxxxxxxxxxxx>  
<audacity4blind-bounce@xxxxxxxxxxxxx 
<mailto:audacity4blind-bounce@xxxxxxxxxxxxx> > On Behalf Of 
tattenberg@xxxxxxxxx <mailto:tattenberg@xxxxxxxxx
Sent: Monday, 31 August 2020 7:50 PM
To: audacity4blind@xxxxxxxxxxxxx <mailto:audacity4blind@xxxxxxxxxxxxx
Subject: [audacity4blind] Re: Simple problem with Deleting and Recording

 

Hi Gang, Andrew et al.

Thanks – I forgot to give those specs. I am using JAWS 2018 with Windows 10. It 
is Audacity 2.4.2. The computer is a laptop. I have no mic to plug in, so I 
should be using the built in one. Might headphones be interfering? I’ve not 
gotten any recorded sound with or without headphones plugged in. It’s been a 
couple months since I’ve tried the mic out elsewhere, but it has worked, and 
Windows says it is working.

Shift + c does not seem to do anything after I select a track, nor does 
pressing the delete button. JAWS says the track is selected after I enter, and 
it unselects when I enter again as it should. I’ve been using the toolbar for 
input/output levels. Currently, for example, the playback volume is 26, and 
recording volume is 54. I’ve tried tooling with the monitor in the Record 
Meter, which doesn’t seem to tell me anything. The button says peak -60DB, as 
does the Play Meter. This doesn’t change.    

  Any ideas why I’m apparently not able to record sound, or delete tracks? Hope 
this info helps. 

Unfortunately, I just joined the list and missed the earlier discussion on 
selecting audio.

Thanks!

Trevor

 

 

From: audacity4blind-bounce@xxxxxxxxxxxxx 
<mailto:audacity4blind-bounce@xxxxxxxxxxxxx>  
<audacity4blind-bounce@xxxxxxxxxxxxx 
<mailto:audacity4blind-bounce@xxxxxxxxxxxxx> > On Behalf Of Andrew Downie
Sent: Monday, August 31, 2020 6:38 AM
To: audacity4blind@xxxxxxxxxxxxx <mailto:audacity4blind@xxxxxxxxxxxxx
Subject: [audacity4blind] Re: Simple problem with Deleting and Recording

 

Hi Trevor

Sounds like you are tantalisingly close.  Incidentally, choice of screen reader 
should not be an issue here.

Are you using a desktop or laptop?  Laptops can get a bit tricky with their 
combo mic/earphone sockets.  If the following does not help, can you give us a 
bit more info about your system.  Oh, and no need to apologise for asking 
questions.  Getting a handle on the details of sound devices can involve a 
quite long learning curve.

That you are getting playback to work is encouraging.  It is now just a matter 
of sorting out the recording device.

Are you setting input and output through Preferences or through the toolbar.  
If the toolbar, you can check the recording level.  From the tracks panel, 
press control+shift+f6.  Shift-tab a few times to set output, input and host.  
Keep shift-tabbing to check playback and recording levels.  Adjust recording 
level if very low.  Press control+f6 to get back to the tracks panel.

Re the possibly related issue, apologies if covering what you already know.  
Arrowing up and down moves you from track to track.  However, to do most things 
with the current track it must be selected.  Pressing Enter will toggle 
selection of the track.  That is, select it if not selected and deselect it if 
selected.  Even then, you have not selected any audio on the track.  You can 
delete an entire track by arrowing to it and pressing shift+c.  Control+z will 
undo if you regret the decision.

There has been recent discussion here regarding selecting audio.  Let us know 
if you missed that.

 

 

Andrew

 

From: audacity4blind-bounce@xxxxxxxxxxxxx 
<mailto:audacity4blind-bounce@xxxxxxxxxxxxx>  
<audacity4blind-bounce@xxxxxxxxxxxxx 
<mailto:audacity4blind-bounce@xxxxxxxxxxxxx> > On Behalf Of 
tattenberg@xxxxxxxxx <mailto:tattenberg@xxxxxxxxx
Sent: Monday, 31 August 2020 6:06 AM
To: audacity4blind@xxxxxxxxxxxxx <mailto:audacity4blind@xxxxxxxxxxxxx
Subject: [audacity4blind] Simple problem with Deleting and Recording

 

Hi List,

I’m a beginner to Audacity. Apologies about this being juvenilia, but When I 
click R and shift + R to record, then press space to listen back, I do not hear 
anything. I’ve tried playing with the adjustments, including sound outputs. 
Actually, I do see that the audio position is changing – time is passing on the 
track I’ve generated. I am able to listen to the content of imported files I 
did not create with Audacity. Any ideas why this is?

I am using Speakers/Headphones (Realtech) as my playback device, and Microphone 
Array (Realtech) is my recording device. Windows 10 tells me they are working. 
MME is the Audio host.    

On a possibly related note, I am not able to delete files tracks I’ve generated 
or imported, even after I select them, including by way of entering, select 
all, etc. I am told “no audio selected.”

Any ideas you have in mind? To summarize, I’m trying to simultaneously listen 
to an imported file, which I’m able to do, and record a new track with shift + 
R, which creates a new track with evidently no sound.

I very much appreciate it.

Best,

Trevor

 

Other related posts: