Thanks Andrew,
Definitely will give that a try.
You are a fountain of knowledge.
Thanks
Adrian
From: audacity4blind-bounce@xxxxxxxxxxxxx
[mailto:audacity4blind-bounce@xxxxxxxxxxxxx] On Behalf Of Andrew Downie
Sent: Monday, 11 May 2020 8:52 PM
To: audacity4blind@xxxxxxxxxxxxx
Subject: [audacity4blind] Re: Recording problem
Adrian, some food for thought during your investigations. You mention that you
have two sound cards but only use one. While I have not found Audacity to be
terribly fussy about such things, ideally the screen reader should be on a
separate card. That issue aside, it may be worth playing with advanced
settings for the card being used by Audacity. The easiest way to get to the
settings these days is to press Windows+r followed by mmsys.cpl and press
Enter. Select the Recording tab and go into Properties of the card Audacity is
using. Under Advanced, see whether exclusive mode is checked. If not, check
it. I am vague about the benefits or otherwise of giving exclusive mode
applications priority – unchecked seems to work here.
Andrew
From: audacity4blind-bounce@xxxxxxxxxxxxx <audacity4blind-bounce@xxxxxxxxxxxxx>
On Behalf Of Adrian
Sent: Monday, 11 May 2020 8:16 PM
To: audacity4blind@xxxxxxxxxxxxx
Subject: [audacity4blind] Re: Recording problem
Hi David,
I just did some recording on my main pc & all is working fine.
I guess it must be some config issue on my other pc.
I do have 2 sound cards but only use one .
More investigation tomorrow.
Again, thanks for all the input.
Adrian
From: audacity4blind-bounce@xxxxxxxxxxxxx
[mailto:audacity4blind-bounce@xxxxxxxxxxxxx] On Behalf Of David Bailes
Sent: Monday, 11 May 2020 6:38 PM
To: audacity4blind@xxxxxxxxxxxxx
Subject: [audacity4blind] Re: Recording problem
Hi Adrian,
you have said previously that you use both Jaws and NVDA. Does this recording
problem occur with both screen readers?
thanks,
David.
On Sun, 10 May 2020 at 10:53, Adrian <ado58@xxxxxxxxxxxxxxx> wrote:
Hi all,
Has anyone experienced the problem where after recording track 1 then track 2
without any problems, track 3 has no recording.
I have tried shift+r & also adding track then hitting r.
If I delete 1 of the 1st two tracks then it records again but no more than 2
tracks.
FYI, this is ver 2.3.3
Is there a setting I have missed that only alllows 2 track recording?
Thanks
Adrian
