Yes, but to have two options for output at once... Software passthrough
through device a and Playback through device b... Now wouldn’t that be cool?
Peace,
d
From: Andrew Downie
Sent: Thursday, November 01, 2018 9:52 PM
To: audacity4blind@xxxxxxxxxxxxx
Subject: [audacity4blind] Re: Recording and listening at the same time
David, not sure whether the following helps. You can certainly playback
through a different card than the one used for recording. Either under Devices
in Preferences or on the toopbar at the top of the main windows
(control-shift-f6).
Andrew
From: audacity4blind-bounce@xxxxxxxxxxxxx <audacity4blind-bounce@xxxxxxxxxxxxx>
On Behalf Of David Engebretson Jr
Sent: Friday, 2 November 2018 2:46 PM
To: audacity4blind@xxxxxxxxxxxxx
Subject: [audacity4blind] Re: Recording and listening at the same time
Thanks David.
Wouldn’t it be great to have a seprate “Pass Through” device under the Devices
in Properties?
I often have two or three audio devices plugged in at once. The more
configuration options the better!
Best,
David
From: David Bailes
Sent: Thursday, November 01, 2018 9:54 AM
To: audacity4blind@xxxxxxxxxxxxx
Subject: [audacity4blind] Re: Recording and listening at the same time
Hi David,
software playthrough always uses the playback device.
An example of it's use is if you're recording from a turntable or tape deck
which is connected to the computer using a usb cable, then with software
playthough enabled, you can listen to what is being recorded from the turntable
or tape deck. On Windows, an alternative would be to check the "listen to this
device" check box, which is on the listen tab of the recording device's
properties.
David.
On Wed, 31 Oct 2018 at 23:28, David Engebretson Jr
<accessible.engineering@xxxxxxxxx> wrote:
You know, I don’t think I’ve ever used the software playthrough feature
successfully. It’s always been recorded... sometimes it is really neat – a
special type of echo/delay. Most of the time, though, it duplicates the track
and adds to the volume.
Is there a way to only have the software playthrough come through a specific
device, or does it always come through the devices->interface Host>Playback
device?
Peace,
David
From: Andrew Downie
Sent: Wednesday, October 31, 2018 3:29 PM
To: audacity4blind@xxxxxxxxxxxxx
Subject: [audacity4blind] Re: Recording and listening at the same time
Yes, my bad (frown). Importantly, for what Claire wants to do, default
settings are correct.
Andrew (slaps wrist)
From: audacity4blind-bounce@xxxxxxxxxxxxx
<audacity4blind-bounce@xxxxxxxxxxxxx> On Behalf Of David Bailes
Sent: Wednesday, 31 October 2018 8:21 PM
To: audacity4blind@xxxxxxxxxxxxx
Subject: [audacity4blind] Re: Recording and listening at the same time
Hi Andrew,
when you say "please disregard suggestions to turn on overdub", I presume you
mean playthrough? (smile),
David.
On Tue, 30 Oct 2018 at 21:58, Andrew Downie <access_tech@xxxxxxxxxxxxxx>
wrote:
Hi Claire
Please disregard suggestions to turn on overdub. As David B mentioned, it
is not necessary for what you are wanting to do. As David E said, pressing r
will create a track if none exist and start recording on it. Pressing r again
will append to that track. Pressing shift-r will create a second, third,
fourth etc track and start recording on that freshly created track.
Importantly, when you start recording on a second track, by default you
will hear what you recorded on the first track. As Ted suggested, headphones
will be necessary to avoid a jumbled mess.
For your current project, import the music into Audacity. Then move by
whatever means you choose to the point where you want to start recording your
voice. At that point, press shift-r to start recording. You will hear the
music while you record. It will pull down the level of the music as you talk.
Or you may prefer to adjust levels – depends on the effect you want.
A couple of other useful commands to keep in mind. Shift-s solos the
current track (plays it and no others). Shift-u mutes the current track.
Happy podcasting.
Andrew
One Audacity feature you may find useful in this situation is Autoducking
under the effects menu.
From: audacity4blind-bounce@xxxxxxxxxxxxx
<audacity4blind-bounce@xxxxxxxxxxxxx> On Behalf Of Claire Potter
Sent: Wednesday, 31 October 2018 4:49 AM
To: audacity4blind@xxxxxxxxxxxxx
Subject: [audacity4blind] Re: Recording and listening at the same time
Hi, i'm really confused, how can I check if overdub is on, both my
screenreaders, I use NVDA and Jaws don't tell me. When I go to load the track
and press r then n nothing at all happens.
Warm regards, Claire Potter, Check out my brand new website:
www.pottersplace.me.uk
On 30 Oct 2018, at 17:05, Ella Yu <ellaxyu@xxxxxxxxx> wrote:
Turn on overdub (I think it's in the transport mccu). This allows you to
listen to a track while recording on top of it. Wear earphones to listen for
best results. Once you press R to record with the file you want to listen to
loaded, press N for "new track" and press space bar to play the track. You may
speak when you need to.
----- Original Message -----
From: Claire Potter <claire.potter99@xxxxxxxxx
To: audacity4blind@xxxxxxxxxxxxx
Date sent: Tue, 30 Oct 2018 16:31:35 +0000
Subject: [audacity4blind] Recording and listening at the same time
Hi all, I have yet another question for you all. I have a music track
which I need to use, but I need to record some speech over it, this is to
create a podcast intro, does anyone know if it is possible for me to hear the
music track while recording my speech? the speech will not need to start until
around the middle of the track. Thank you in advance.
Warm regards, Claire Potter, Check out my brand new website:
www.pottersplace.me.uk
The audacity4blind web site is at
//www.freelists.org/webpage/audacity4blind
Subscribe and unsubscribe information, message archives,
Audacity keyboard commands, and more...
To unsubscribe from audacity4blind, send an email to
audacity4blind-request@xxxxxxxxxxxxx
with subject line
unsubscribe
