[audacity4blind] Re: Recording Questions

  • From: "Adrian" <ado58@xxxxxxxxxxxxxxx>
  • To: <audacity4blind@xxxxxxxxxxxxx>
  • Date: Wed, 1 Jul 2020 10:08:51 +1000

Hi David,

Re the jaws addon, the alt + delete key use to work with ver 2.3.3.

Now it says, “to use this feature you must enable the selection tool bar”

Is this done in Jaws or Audacity?

 

Thanks

Adrian

 

From: audacity4blind-bounce@xxxxxxxxxxxxx 
[mailto:audacity4blind-bounce@xxxxxxxxxxxxx] On Behalf Of David Engebretson Jr.
Sent: Wednesday, 1 July 2020 6:55 AM
To: audacity4blind@xxxxxxxxxxxxx
Subject: [audacity4blind] Re: Recording Questions

 

Curious; what did you setup as your default for the Windows sound device?

 

Regarding switching where JAWS outputs to; If you:

1.      Press JAWSKey+shift+control+’j’ (assuming you have JAWS set to the 
laptop layout)
2.      Arrow down to Utilities and press enter
3.      Arrow down to Sound Card and press enter

 

You’ll see a listing of devices that you can send the JAWS output to. Just make 
sure it’s not the same device that you setup as your Windows default sound 
device and you should be golden for recording from the internet without JAWS 
blabbing on your recording.

 

Also, a little aside, are you using the JAWS scriptset that Gary Campbell 
develops? If not, you might find it useful. There’s some nifty shortcuts in 
there (for example: if you press ‘g’ it will announce the recording input 
level, and if you press ‘h’ it will announce the output level, also alt+delete 
will announce the current position on the timeline).

 

I’d be happy to send you a link to it if’n you’re interested.

 

Bestest,

David

 

From: audacity4blind-bounce@xxxxxxxxxxxxx <audacity4blind-bounce@xxxxxxxxxxxxx> 
On Behalf Of stephen (Redacted sender "sgsmg49" for DMARC)
Sent: Tuesday, June 30, 2020 1:16 PM
To: audacity4blind@xxxxxxxxxxxxx
Subject: [audacity4blind] Re: Recording Questions

 

Hey Guys,

 

Thanks for the help.  I’ve been playing with both my new Dell Windows 10 and my 
old Dell Windows 7 laptops.  With both units I can make a nice sounding 
internet recording now.  However I think separating Jaws to another card is 
beyond me without lots of further help and research.  In the meantime I work 
around this by having Audacity ready for me to hit R and my source ready to hit 
play.  With focus on Audacity I disable Jaws with Speech on demand, hit R, 
Alt/Tab, then enter and I’m off to the races.  Again, thanks for the help.  
Ted, I may take you up on your offer at another time.

 

Steve 

 

From: audacity4blind-bounce@xxxxxxxxxxxxx 
[mailto:audacity4blind-bounce@xxxxxxxxxxxxx] On Behalf Of Ted Galanos
Sent: Tuesday, June 30, 2020 11:03 AM
To: audacity4blind@xxxxxxxxxxxxx
Subject: [audacity4blind] Re: Recording Questions

 

I am not at my computer presently, but when I am maybe I can talk you through 
some of these issues. Send me a text message with your phone number and when I 
am at my computer, I will call you back. If you prefer to use zoom or Skype, 
send me your Skype ID or request that I sent you a zoom invite.

Ted Galanos

www.GalanosConsulting.com

713-396-3495

Please consider donating to my ABLE account. 

https://www. ablegifting.com/TX/K9L8A2

 

On Jun 29, 2020, at 9:08 PM, (Redacted sender sgsmg49 for DMARC) 
<dmarc-noreply@xxxxxxxxxxxxx> wrote:



Okay Guys,

 

I’m missing something here.  I’ve enabled Stereo Mix.  In Audacity I have MME 
selected as my host and Stereo Mix as my recording device. And and real tech 
speakers selected as my playback device.  In Jaws utilities under sound card 
I’ve selected headphones.  I’ve also tried plugging in my USB interface which 
has a headphone jack and tried selecting that.  No matter what I do everything 
comes through the headphones and the two aren’t separated.  What in the heck am 
I doing wrong?  Thanks in advance.

 

Steve

 

From: audacity4blind-bounce@xxxxxxxxxxxxx 
[mailto:audacity4blind-bounce@xxxxxxxxxxxxx] On Behalf Of David Engebretson Jr.
Sent: Monday, June 29, 2020 5:51 PM
To: audacity4blind@xxxxxxxxxxxxx
Subject: [audacity4blind] Re: Recording Questions

 

Howdy,

 

I found the stereo mix under Sound Settings. I then clicked on “manage sound 
devices”. Under manage sound devices there were three list boxes of sound 
devices; Output devices, Input devices, and Disabled devices. For me the 
“stereo mix” was under the Disabled devices list. I pressed enter on it, then 
tabbed to the “enable” button and pressed enter to enable it.

 

Since my screen reader goes through that same sound card, I had to change the 
sound card my screen reader uses in order to make sure it doesn’t get into the 
recording.

 

Regarding adding your USB audio device; my motto is that one can never have too 
many sound devices. *smile*

 

WASAPI vs. “stereo mix”: You’ll probably need to fiddle with sound levels in 
the Windows Volume control along with a mixture of the Audacity recording 
levels to get the sound how you like it with either of those hosts. It can be 
tedious but worth it when you have it sounding just like you like it.

 

Have fun!

 

 

 

From: audacity4blind-bounce@xxxxxxxxxxxxx <audacity4blind-bounce@xxxxxxxxxxxxx> 
On Behalf Of stephen (Redacted sender "sgsmg49" for DMARC)
Sent: Monday, June 29, 2020 1:15 PM
To: audacity4blind@xxxxxxxxxxxxx
Subject: [audacity4blind] Re: Recording Questions

 

Hello ted and David and anyone else who may wish to chime in.  Where would I 
find the stereo mix option?  I’ve Made a basic recording using wasapi.  For 
rerouting JAWS the only options I have are default sound card,  
Speaker/headphones HD codex and communications Headphone.  I have a Barenger U 
Phono USB interface handy.  Should I plug that in and run headphones through 
it?  Another question, are levels set do a default in this form of recording? 
Does the volume of the speakers influence the volume of the recording?  Thanks 
again.

 

Steve

 

From: audacity4blind-bounce@xxxxxxxxxxxxx 
[mailto:audacity4blind-bounce@xxxxxxxxxxxxx] On Behalf Of David Engebretson Jr.
Sent: Sunday, June 28, 2020 11:18 PM
To: audacity4blind@xxxxxxxxxxxxx
Subject: [audacity4blind] Re: Recording Questions

 

If all you want to do is record from the internet: Not all internal sound cards 
provide a “stereo mix” so it might be easier to switch the interface settings 
under preferences in Audacity to WASAPI and then make sure your screen reader 
is output on a separate audio output device before you begin recording.

 

There are so many variables… don’t get discouraged just because one persons 
internal soundcard has more power than yours. Often a laptop will have less 
functionality. It’s all a part of the computer game *smile*.

 

Best,

David

 

From: audacity4blind-bounce@xxxxxxxxxxxxx <audacity4blind-bounce@xxxxxxxxxxxxx> 
On Behalf Of stephen (Redacted sender "sgsmg49" for DMARC)
Sent: Sunday, June 28, 2020 7:05 PM
To: audacity4blind@xxxxxxxxxxxxx
Subject: [audacity4blind] Re: Recording Questions

 

Okay, I’ll play around and give it a try.  Just to confirm, this is how I’d 
record say the audio of a movie off the computer?  Thanks.

 

Steve

 

From: audacity4blind-bounce@xxxxxxxxxxxxx 
[mailto:audacity4blind-bounce@xxxxxxxxxxxxx] On Behalf Of Ted Galanos
Sent: Sunday, June 28, 2020 5:15 PM
To: audacity4blind@xxxxxxxxxxxxx
Subject: [audacity4blind] Re: Recording Questions

 

I was using stereo mix to record Jaws earlier today and did not have to change 
that setting.

Ted Galanos

www.GalanosConsulting.com

713-396-3495

Please consider donating to my ABLE account. 

https://www. ablegifting.com/TX/K9L8A2

 

On Jun 28, 2020, at 3:24 PM, tr.galanos@xxxxxxxxx wrote:



Oh yeah, to reroute Jaws,

Insert J, brings up Jaws menu.

Go to utilities, then sound cards.

 

 

Ted Galanos

Google Phone: 713-396-3495

Skype: tedster1

 

Social Media:

 <https://www.facebook.com/Teddy.Galanos/%3e> Facebook . 

 <https://twitter.com/TedGalanos%3e> Twitter. 

 <https://www.youtube.com/channel/UCUmRfAYgsw0ePTCIHKm4n_g%3e> Youtube.

 

Use  <https://www.rakuten.com/r/TRGALA2?eeid=46910> Rakuten and earn cash back 
when shopping.

Start investing with @Stash today!  Get $5 to invest when you  
<https://get.stashinvest.com/theodordt8vd> click here.

 

Please consider donating to my Texas ABLE program.

 <https://www.ablegifting.com/TX/K9L8A2https://www.ablegifting.com/TX/K9L8A2

Thanks and God bless you!

"Now faith is the substance of things hoped for, the evidence of things not 
seen." - Hebrews 11:1

 

From: audacity4blind-bounce@xxxxxxxxxxxxx <audacity4blind-bounce@xxxxxxxxxxxxx> 
On Behalf Of Redacted sender "sgsmg49" for DMARC
Sent: Sunday, June 28, 2020 2:41 PM
To: audacity4blind@xxxxxxxxxxxxx
Subject: [audacity4blind] Recording Questions

 

Hello All,

 

I’m working with a Dell laptop running Windows 10 and JAWS 2020 and the latest 
version of Audacity.  What I’m looking for is how to record what is coming 
through the computer speakers  such as a streamed item and if possible avoid 
having the screen reader coming through at the same time.   I know this has 
been covered before and I’m hoping someone may have an instruction list set up 
and ready to go.  Any help is appreciated.  Thanks.

 

Steve

Other related posts: