[audacity4blind] Re: Mixing Recorded Tracks

  • From: Robert Hänggi <aarjay.robert@xxxxxxxxx>
  • To: audacity4blind@xxxxxxxxxxxxx
  • Date: Fri, 5 Jun 2020 03:55:16 +0200

Hi folks,
How are your opinions on the increase/decrease values of gain and pan
(Shift+Alt+Arrows)
Gain: 1 dB per move
Pan: 10 % per move


Honestly, I find those very coarse and would tend to redo them for 0.1
dB and 1 %.
How are your feelings about that?
If you wanna know how much a dB can mean:
- Create a tone
- duplicate it (Control+D)
- invert one of them (Effects -> invert)
- nudge one track up or down (Alt+Shift+Up/Down) during playback.
You can also set the gain to 0.1 dB (Shift+G) to have a feeling for
that as well.
Please tell me your preferred resolutions, likewise for the sliders in
the two dialogs if you were so kind.
Regards
Robert

On 05/06/2020, Richard Wells <richwels@xxxxxxx> wrote:

Hey David: It is great to see you here as well. Even with normalizing, I
would like to be able to do some fine tuning on levels after the fact. I
could

select an entire track and change the volume on it, but this would be very
time consuming to do.

On 6/4/2020 6:51 PM, David Engebretson Jr. wrote:
Hey! Nice to see ya!

Honestly, amplifying each track (or portions of tracks) with "amplify" in
the effects menu is what I do. Usually, though, I don't have to do much
mixing after normalizing because I make sure the recording sounds good as
I'm recording each track. I've got a mixer that I run everything through
before it goes to Audacity. All tracks are on the ame baseline.

I thought I heard somewhere that a BCF 2000 can be used with Audacity but
I haven't tried it yet...

Some of the more power users will hopefully provide us with tips and
tricks as to how they efficiently mix with Audacity.

Are you using JAWS or NVDA? Just curious because there is a JAWS scriptset
that might help. Also, what version of Audacity are you running?

Don't be such a stranger, old friend!
David


-----Original Message-----
From: audacity4blind-bounce@xxxxxxxxxxxxx
<audacity4blind-bounce@xxxxxxxxxxxxx> On Behalf Of Richard Wells
Sent: Thursday, June 04, 2020 4:04 PM
To: audacity4blind@xxxxxxxxxxxxx
Subject: [audacity4blind] Mixing Recorded Tracks

Hello: This is my first post to this list. I am just getting into Audacity
recording and have figured out how to do multi-track recording.
What I can't figure out is how to mix the tracks I have recorded. Surely
there is an easier way besides raising and lowering volume of tracks in
the effects menu, at least I hope there is. I have searched help to no
avail, so please don't tell me to RTFM without telling me what to read.
Thank you for answering newby questions.


The audacity4blind web site is at
//www.freelists.org/webpage/audacity4blind

Subscribe and unsubscribe information, message archives, Audacity keyboard
commands, and more...

To unsubscribe from audacity4blind, send an email to
audacity4blind-request@xxxxxxxxxxxxx
with subject line
unsubscribe



The audacity4blind web site is at
//www.freelists.org/webpage/audacity4blind

Subscribe and unsubscribe information, message archives,
Audacity keyboard commands, and more...

To unsubscribe from audacity4blind, send an email to
audacity4blind-request@xxxxxxxxxxxxx
with subject line
unsubscribe


The audacity4blind web site is at
//www.freelists.org/webpage/audacity4blind

Subscribe and unsubscribe information, message archives,
Audacity keyboard commands, and more...

To unsubscribe from audacity4blind, send an email to
audacity4blind-request@xxxxxxxxxxxxx
with subject line
unsubscribe



The audacity4blind web site is at
//www.freelists.org/webpage/audacity4blind

Subscribe and unsubscribe information, message archives,
Audacity keyboard commands, and more...

To unsubscribe from audacity4blind, send an email to
audacity4blind-request@xxxxxxxxxxxxx
with subject line
unsubscribe

Other related posts: