[audacity4blind] Re: Jaws Scripts Problems

  • From: "David Engebretson Jr." <accessible.engineering@xxxxxxxxx>
  • To: <audacity4blind@xxxxxxxxxxxxx>
  • Date: Fri, 3 Jul 2020 19:46:35 -0700

Try this:

1.      Import a track
2.      Press "home" to go to the beginning of the audio
3.      Press enter to select the track
4.      Press space to start playback
5.      Press left brace and then a few seconds later press right brace
(this will select the left and right edge of a segment of audio
6.      Press space to stop
7.      Press shift+space to start a loop playback. Does it play the part of
the track you selected?

 

This should work with or without the scripts loaded. BTW, you can disabled
the Audacity scripts without uninstalling them. Happy to walk you through
that, too, assuming you are interested.

 

Bestest,

David

 

 

From: audacity4blind-bounce@xxxxxxxxxxxxx
<audacity4blind-bounce@xxxxxxxxxxxxx> On Behalf Of Redacted sender "sgsmg49"
for DMARC
Sent: Friday, July 03, 2020 7:39 PM
To: audacity4blind@xxxxxxxxxxxxx
Subject: [audacity4blind] Re: Jaws Scripts Problems

 

Here we go.  I compiled successfully and there was no change.  I'm current
with Windows 10 since they don't give us a choice.  I believe I'm working
with 64 bit.  An example of my editing would be after recording a track or
importing one and I want to take off some space in the beginning I'll start
the trackck.  I'll hit space to start play and use the right and left arrow
keys to go back and forth until I'm happy where I am and hit P to pause.
When doing this after installing the scripts every time I hit an arrow key I
get the message that there is no track in the project and they don't move
the cursor. .  I get no response with the J and K keys and I cant make any
selections to delete what I want.  So, that's where I'm at now.  I'll sleep
on it tonight and see what you or anyone else can come up with.  I've been
working without the scripts for three years now so if we can't solve this it
won't be the end of the world.  I do really appreciate all the help from
this list.  

 

Steve

 

From: audacity4blind-bounce@xxxxxxxxxxxxx
<mailto:audacity4blind-bounce@xxxxxxxxxxxxx>
[mailto:audacity4blind-bounce@xxxxxxxxxxxxx] On Behalf Of David Engebretson
Jr.
Sent: Friday, July 3, 2020 10:11 PM
To: audacity4blind@xxxxxxxxxxxxx <mailto:audacity4blind@xxxxxxxxxxxxx
Subject: [audacity4blind] Re: Jaws Scripts Problems

 

Yah, I think so. Someone, earlier in the thread, mentioned that you might
want to try re-compiling the scripts.

 

To do this:

1.      Open Audacity
2.      Press JAWSKey+f2, then 's' until you hear "script manager" then
press enter
3.      Arrow down a little and you should hear the contents of the
audacity.jss file

a.      Might be worth arrowing down until you hear the version number and
make sure it's the latest (Const CS_SCRIPT_VERSION =
"2.2.2-beta-2020-06-21")

4.      Either way, to compile the scripts, press control+'s', you'll hear
JAWS compiled successfully - or not. Either way it will be a clue.
5.      Now alt+tab back to Audacity and see if things work like you expect

a.      I'd enjoy hearing what you do to edit normally. Maybe the scriptset
is blocking your work-flow?

5.      Another good thing to check is your screen resolution. Know how to
do that? If not, I'm happy to guide you.

 

You are using the latest Windows 10, right? Is your system 32 or 64 bit?

 

Anyhoo, I'll quit pestering you about this if you aren't interested in
debugging it.

 

Bestest,

David

 

 

From: audacity4blind-bounce@xxxxxxxxxxxxx
<mailto:audacity4blind-bounce@xxxxxxxxxxxxx>
<audacity4blind-bounce@xxxxxxxxxxxxx
<mailto:audacity4blind-bounce@xxxxxxxxxxxxx> > On Behalf Of Redacted sender
"sgsmg49" for DMARC
Sent: Friday, July 03, 2020 6:51 PM
To: audacity4blind@xxxxxxxxxxxxx <mailto:audacity4blind@xxxxxxxxxxxxx
Subject: [audacity4blind] Re: Jaws Scripts Problems

 

Not sure what you mean by that.  I ran the installer, hit the finish button.
Then launched Audicity.  Am I missing something here?

 

Steve

 

From: audacity4blind-bounce@xxxxxxxxxxxxx
<mailto:audacity4blind-bounce@xxxxxxxxxxxxx>
[mailto:audacity4blind-bounce@xxxxxxxxxxxxx] On Behalf Of David Engebretson
Jr.
Sent: Friday, July 3, 2020 9:46 PM
To: audacity4blind@xxxxxxxxxxxxx <mailto:audacity4blind@xxxxxxxxxxxxx
Subject: [audacity4blind] Re: Jaws Scripts Problems

 

But, before you do that, did you launch the script manager and recompile?

 

Thanks!

 

 

From: audacity4blind-bounce@xxxxxxxxxxxxx
<mailto:audacity4blind-bounce@xxxxxxxxxxxxx>
<audacity4blind-bounce@xxxxxxxxxxxxx
<mailto:audacity4blind-bounce@xxxxxxxxxxxxx> > On Behalf Of Redacted sender
"sgsmg49" for DMARC
Sent: Friday, July 03, 2020 6:44 PM
To: audacity4blind@xxxxxxxxxxxxx <mailto:audacity4blind@xxxxxxxxxxxxx
Subject: [audacity4blind] Re: Jaws Scripts Problems

 

Okay David, I just ranthe the installer again.  I did not have Audacity open
when I ran it.   The version is 222beta20200621.  I installed the full
version.  I was not asked about Jaws since there is only one version on the
PC.  I confirmed that I'm working with the full keyboard.  I imported a file
after the installation and have the same issue.  Everything I do tells me
that there are no tracks in the project.    Really weird.  Off to un-install
again.

 

Steve

 

From: audacity4blind-bounce@xxxxxxxxxxxxx
<mailto:audacity4blind-bounce@xxxxxxxxxxxxx>
[mailto:audacity4blind-bounce@xxxxxxxxxxxxx] On Behalf Of Redacted sender
"sgsmg49" for DMARC
Sent: Friday, July 3, 2020 9:16 PM
To: audacity4blind@xxxxxxxxxxxxx <mailto:audacity4blind@xxxxxxxxxxxxx
Subject: [audacity4blind] Re: Jaws Scripts Problems

 

Hi David,  When installing the scripts I just went as straightforward as I
could, not getting fancy on anything.  Yes, I have full keyboard enabled.
As far as toolbars are concerned all I've worked with are autio host,
recording device and playback device.   I'll try to install them again and
see what happens since it's easy enough to un-install them.  More to follow.

 

Steve

 

From: audacity4blind-bounce@xxxxxxxxxxxxx
<mailto:audacity4blind-bounce@xxxxxxxxxxxxx>
[mailto:audacity4blind-bounce@xxxxxxxxxxxxx] On Behalf Of David Engebretson
Jr.
Sent: Friday, July 3, 2020 9:05 PM
To: audacity4blind@xxxxxxxxxxxxx <mailto:audacity4blind@xxxxxxxxxxxxx
Subject: [audacity4blind] Re: Jaws Scripts Problems

 

Curious about a couple of things:

 

1.      Did you do a "full" version of the JAWS scripts for Audacity
install?
2.      Did you select anything in the install other than the defaults?
3.      Did you make sure and replace all files when prompted?

 

I ask because I have had troubles with the installer not compiling if I
choose options other than the defaults during the Audacity scripts
installation.

 

Also, do you have the full set of keyboard shortcuts enabled in Audacity? To
do this you can:

1.      Go to Preferences (control+'p')
2.      Navigate to Keyboard, tab to the defaults button under key bindings
and press enter
3.      Arrow to Full and press enter
4.      Tab to the OK button and press enter to close Preferences

 

One last thing: Have you made any changes to your  Toolbars in Audacity?

1.      Under View->Toolbars is an option to reset your toolbars - you could
try that.
2.      Also, directly below the Toolbars sub-menu is a checkbox that says
"Show Extra Menus" press enter on that to show some extra functionality in
the menu system.

 

Hoping to work this out for you. the scripts do make some things quicker
while using JAWS. I bet you'll enjoy them!

 

Bestest,

David

 

From: audacity4blind-bounce@xxxxxxxxxxxxx
<mailto:audacity4blind-bounce@xxxxxxxxxxxxx>
<audacity4blind-bounce@xxxxxxxxxxxxx
<mailto:audacity4blind-bounce@xxxxxxxxxxxxx> > On Behalf Of Redacted sender
"sgsmg49" for DMARC
Sent: Friday, July 03, 2020 5:37 PM
To: audacity4blind@xxxxxxxxxxxxx <mailto:audacity4blind@xxxxxxxxxxxxx
Subject: [audacity4blind] Re: Jaws Scripts Problems

 

Hi David,

 

I'm using audacity 2.4.2 installed by the installer.  I installed the
scripts from the link from your post on Tuesday.  Jaws 2020 is the only
version of Jaws on this computer.  I un-installed the scripts and all is
good now.  The main things on the scripts that interested me was the level
checking with g.  So, not a big deal.  Now if I can just find a way for a
blind guy to navigate Spotify Premium I'd be a happy camper.  Any
suggestions anyone?  Take care and again, thanks for the help.

 

Steve.

 

From: audacity4blind-bounce@xxxxxxxxxxxxx
<mailto:audacity4blind-bounce@xxxxxxxxxxxxx>
[mailto:audacity4blind-bounce@xxxxxxxxxxxxx] On Behalf Of David Engebretson
Jr.
Sent: Friday, July 3, 2020 4:53 PM
To: audacity4blind@xxxxxxxxxxxxx <mailto:audacity4blind@xxxxxxxxxxxxx
Subject: [audacity4blind] Re: Jaws Scripts Problems

 

Are you using the zip or installer version of Audacity 2.4.2?

 

Are you sure you installed the scripts on the version of JAWS you always
use?

 

Just a couple of debugging questions.

 

Best,

David

 

 

From: audacity4blind-bounce@xxxxxxxxxxxxx
<mailto:audacity4blind-bounce@xxxxxxxxxxxxx>
<audacity4blind-bounce@xxxxxxxxxxxxx
<mailto:audacity4blind-bounce@xxxxxxxxxxxxx> > On Behalf Of stephen
(Redacted sender "sgsmg49" for DMARC)
Sent: Friday, July 03, 2020 7:54 AM
To: audacity4blind@xxxxxxxxxxxxx
Subject: [audacity4blind] Re: Jaws Scripts Problems

 

Here's a follow up to my problem. I removed my USB interface and have
returned sound settings and Jaws back to there original defaults.   I've
imported both a professionally recorded file and one I recorded myself and
there is no difference in the behavior.  I can't do any editing shortcuts
and whatever I do with the arrow keys all I get is the message, There are no
tracks in the project. I've un-selected and Re-selected the track using
Enter, I've used Control-A and I've tried K-J, which Jaws doesn't  verbalize
and all I get is, There are no tracks in the project.  The track will play
with the space bar and will pause but will not respond to the arrow keys,
just that dreaded message keeps coming back. I can export through the File
menu without issue.  This all began with the installation of the scripts.
Will someone please instruct me how to remove them.  I'll be happy to be
back where I was before.  Thanks.

 

Steve

 

From: audacity4blind-bounce@xxxxxxxxxxxxx
<mailto:audacity4blind-bounce@xxxxxxxxxxxxx>
[mailto:audacity4blind-bounce@xxxxxxxxxxxxx] On Behalf Of stephen ;(Redacted
sender "sgsmg49" for DMARC)
Sent: Friday, July 3, 2020 8:06 AM
To: audacity4blind@xxxxxxxxxxxxx <mailto:audacity4blind@xxxxxxxxxxxxx
Subject: [audacity4blind] Re: Jaws Scripts Problems

 

David,

 

Yes, yes and yes.   The scripts are from the post you put out this week and
Jaws 2020 is the only version I have on this unit.  It's very strange. This
happens with the internet recording.  I want to import a file and see if I
get the same reaction.   I'll post what I find.  Anyway I''m not opposed to
just removing the scripts if I could get instructions on how to do so.
Thanks for any advice.

 

Steve  

 

From: audacity4blind-bounce@xxxxxxxxxxxxx
<mailto:audacity4blind-bounce@xxxxxxxxxxxxx>
[mailto:audacity4blind-bounce@xxxxxxxxxxxxx] On Behalf Of David Engebretson
Jr.
Sent: Thursday, July 2, 2020 10:43 PM
To: audacity4blind@xxxxxxxxxxxxx <mailto:audacity4blind@xxxxxxxxxxxxx
Subject: [audacity4blind] Re: Jaws Scripts Problems

 

What version of Audacity are you using? You said "latest", did you mean
2.4.2?

 

What version of the scripts are you running? You said "latest", does this
mean Jaws-Script-for-Audacity_2_2_2-beta-2020-06-21?

 

Also, when you installed the "latest" scripts, are you certain you installed
them into JAWS 2020? The installer dialog gives you the opportunity to
install the scripts to any previous versions of JAWS that you might have
installed on your machine.

 

Just checking.

David

 

From: audacity4blind-bounce@xxxxxxxxxxxxx
<mailto:audacity4blind-bounce@xxxxxxxxxxxxx>
<audacity4blind-bounce@xxxxxxxxxxxxx
<mailto:audacity4blind-bounce@xxxxxxxxxxxxx> > On Behalf Of Redacted sender
"sgsmg49" for DMARC
Sent: Thursday, July 02, 2020 7:33 PM
To: audacity4blind@xxxxxxxxxxxxx <mailto:audacity4blind@xxxxxxxxxxxxx
Subject: [audacity4blind] Jaws Scripts Problems

 

Hello,

 

I installed the latest Jaws scripts to the latest version of Audacity and am
having nothing but problems since.  When I try to do anything to a project
such as trim space from the beginning or even fast forward with the arrow
keys I get a message that there is no track in the project.  I get the same
message when trying to export using control space E.  I can export through
the file menue but I can't do any editing to the recording.  How can I go
about un-installing the scripts. Or am I missing something here?  I'm
running Windows 10 and Jaws 2020.  Thanks.

 

Steve

Other related posts: