Hi again Diane!
You should normalize both tracks before mixing them. To do this make sure
only one track is selected and press alt-C and then N until you get to
Normalize. Press enter twice. Once to open the effect and again to execute
it. If the main track's volume doesn't vary too much this should result in
equally loud tracks.
Cheers! Robbie
From: audacity4blind-bounce@xxxxxxxxxxxxx
[mailto:audacity4blind-bounce@xxxxxxxxxxxxx] On Behalf Of Diane Scalzi
Sent: Monday, February 13, 2017 9:33 AM
To: audacity4blind@xxxxxxxxxxxxx
Subject: [audacity4blind] Re: Inserting one word in the middle of a track
Hi Liu Kai,
Thanks for the instructions. I had to play with it but finally inserted the
correct words. However, my recording on the second track came out louder
than the first track. Is there any way to fix this? Thanks.
Diane
From: audacity4blind-bounce@xxxxxxxxxxxxx
<mailto:audacity4blind-bounce@xxxxxxxxxxxxx>
[mailto:audacity4blind-bounce@xxxxxxxxxxxxx] On Behalf Of Liu Kai
Sent: Sunday, February 12, 2017 9:13 PM
To: audacity4blind@xxxxxxxxxxxxx <mailto:audacity4blind@xxxxxxxxxxxxx>
Subject: [audacity4blind] Re: Inserting one word in the middle of a track
hi, these instructions should work in win7
1. press enter on the track to select it.
2. ensure that no other track is selected.
3. go to just before the word and push the left bracket.
4. go to just after the word and press the right bracket.
5. go to the generate menue by pressing alt.
6. use the down arrow and find silence.
7. press enter on this and then tab over to ok.
8. give it a second or two to apply the silence, then press r to record and
say the new word
9. a new track would be created so go down to this track and press enter on
it so that the first track and the new recorded track would be selected.
10. press alt and go to the track menue.
11. use the down arrow and press enter on mix and render.
12. give it a few seconds to mix to the original track, it may rename the
track to mixed track, you can feel free to just rename it back to what you
had it before.
hope this helps.
From: Diane Scalzi <mailto:dscalzi@xxxxxxxxxxx>
Sent: Sunday, February 12, 2017 7:40 PM
To: audacity4blind@xxxxxxxxxxxxx <mailto:audacity4blind@xxxxxxxxxxxxx>
Subject: [audacity4blind] Inserting one word in the middle of a track
Hi Everyone,
I misread one word on a recording I am making. I need to be able to change
the word "Albany" to "Albion." What is the easiest way to correct this in
Audacity? Please be very specific in your instructions. All help
appreciated. Thanks.
Diane
Diane
