[audacity4blind] Re: How works "Find zero crossings"
- From: Gale Andrews <gale@xxxxxxxxxxxxxxxx>
- To: audacity4blind@xxxxxxxxxxxxx
- Date: Mon, 29 Aug 2011 16:46:16 +0100
| From Arne <waschmasche@xxxxxxxxxxxx>
| Mon, 29 Aug 2011 15:44:18 +0200
| Subject: [audacity4blind] How works "Find zero crossings"
> zero crossings are helpful to find a good point when cutting audio. The
> command "Edit / Find zero crossings", hotkey z, puts the cursor on such
> a zero crossing. But how does it work when an audio part is selected.
> Does the command apply to the end of the selection, to its beginning or
> both, and what happens if I press z several times? My experience showed
> that the command only applies to the end of selection and seems to jump
> backward to the previous zero crossing. How can I find then zero
> crossing for the selection start?
Use 1.3.13 Beta and see:
http://manual.audacityteam.org/man/Edit_Menu#zero
Gale
The audacity4blind web site is at
//www.freelists.org/webpage/audacity4blind
Subscribe and unsubscribe information, message archives,
Audacity keyboard commands, and more...
To unsubscribe from audacity4blind, send an email to
audacity4blind-request@xxxxxxxxxxxxx
with subject line
unsubscribe
Other related posts:
