Sameer is correct. In earlier versions of Audacity shift-a jumped the cursor
to that point. By going to Keyboard in Preferences you can change default key
combinations if you wish.
Re Gene’s point about adjusting the cursor position: When pressing left
bracket ([) when stopped, a dialog will appear that allows you to set the time
precisely.
Given the amount of queries about this and similar issues, those who are still
confused may want to check out the audio introduction
<https://www.sendspace.com/pro/dl/v56cn4> I did a few weeks ago.
Andrew
From: audacity4blind-bounce@xxxxxxxxxxxxx
[mailto:audacity4blind-bounce@xxxxxxxxxxxxx] On Behalf Of Gene
Sent: Monday, 28 August 2017 5:31 PM
To: audacity4blind@xxxxxxxxxxxxx
Subject: [audacity4blind] Re: Clips etc
You can move the cursor to the current location with the left bracket. Either
press it while the file is playing at the place you want it to be or pause the
file and press it. I don't know what the case in Audacity these days because I
seldom use it any longer. But a good while ago, when I would press left
bracket, it didn't take immediate effect, leaving the cursor perhaps a quarter
second farther to the right than I wanted it. You can hear where the cursor is
by stopping the file after the cursor is set and then pressing play. Play
always starts from the position of the cursor. I'll let others discuss moving
the cursor to the left a small bit if you want or need to. I know a way but
its cumbersome and there may be others, especially after all these years of new
versions. You can experiment and get a feel of how much ahead you need to
press left bracket and, by pressing it just slightly ahead of where you want to
be, you may save your self the need to adjust the cursor some of the time.
Gene
----- Original Message -----
From: Dr. Andre Watson <mailto:dr.andrewatson@xxxxxxxxxxx>
Sent: Monday, August 28, 2017 12:30 AM
To: audacity4blind@xxxxxxxxxxxxx <mailto:audacity4blind@xxxxxxxxxxxxx> ;
'Keith Heltsley' <mailto:keith@xxxxxxxxxxxx>
Subject: [audacity4blind] Re: Clips etc
Hi all,
I’m trying to do what Bonita previously asked. I’m trying to insert clips into
a project. When I press the letter x while the project is playing, the project
does not stop playing. And then when I stop it with the p key or space bar, it
only puts my clips in the beginning of the project.
Anyone have any thoughts?
Thanks
From: audacity4blind-bounce@xxxxxxxxxxxxx
<mailto:audacity4blind-bounce@xxxxxxxxxxxxx>
[mailto:audacity4blind-bounce@xxxxxxxxxxxxx] On Behalf Of Marlon Brandão de ;
Sousa
Sent: Saturday, August 26, 2017 1:03 PM
To: audacity4blind@xxxxxxxxxxxxx <mailto:audacity4blind@xxxxxxxxxxxxx> ; Keith
Heltsley <keith@xxxxxxxxxxxx <mailto:keith@xxxxxxxxxxxx> >
Subject: [audacity4blind] Re: Clips etc
Well x is your friend here.
It will put the cursor where you are listening at a given time.
I am still curious though on why the cursor does not track the play head ... I
have something saying me that I am loosing a revolutionary technique of audio
editing because I can not understand something that is common sense among audio
editors of every daw I can think of at the moment.
On 25/08/2017 12:55, Keith Heltsley wrote:
What are the advantages of not having the cursor track the playback location?
For the sake of newbies who could use some training wheels, might it be
possible to have a setting in Preferences to opt for playback tracking?
To restate my first question… Why would tracking the playback location of the
cursor be a bad thing?
Trying to keep track of the cursor has been my biggest reason for not using
Audacity much. Until recently, when I was forced to use it, due to not having
software for the Mac that I typically have used on my Windows machines for
years. .
Keith Heltsley
keith@xxxxxxxxxxxx <mailto:keith@xxxxxxxxxxxx>
On Aug 24, 2017, at 11:38 AM, Bonita Blankenberg <bonitabonster@xxxxxxxxx
<mailto:bonitabonster@xxxxxxxxx> > wrote:
Wow, that’s exactly the problem I’ve been grappling with. Could not for the
life of me understand why I could not just pause and edit something, not
realizing that the cursor is miles away from where I want it.
Makes me feel so much better, I am no techno smarty, so I really thought I’m
missing something. Your description made it much more understandable.
Thanks Marlon,
Bonita
PS, I’d like to say I live up to my name, but that would sound vane, ☺
B
From: Marlon Brandão de Sousa [ <mailto:splyt.lists@xxxxxxxxx>
mailto:splyt.lists@xxxxxxxxx] ;
Sent: Thursday, August 24, 2017 11:06 AM
To: <mailto:audacity4blind@xxxxxxxxxxxxx> audacity4blind@xxxxxxxxxxxxx; Bonita
Blankenberg; 'David Bailes'
Subject: Re: [audacity4blind] Re: Clips etc
Sorry for the incorrect shift before x I should have tested. Coming from Mac OS
where audacity is not updated (at least the accessible copy) I used shift + a
and now it is only x.
One of the things I had more difficulty in understanding the way Audacity works
is to separate selection boundaries of the cursor.
Folks,
Please do warn me if I am wrong.
The cursor is not selection dependent. The cursor is not track dependent. The
cursor is a feature that may be anywhere between the absolute time range 0 to
the last millisecond of the last track of the whole project.
Setting the selection, (specifying a start and an end boundaries of a piece of
audio that might comprise more than one track) as far as I know, does not
affect the cursor.
Also, at least as far as I could verify, the cursor is not affected by the play
activity, meaning that you can be listening to a part of the audio and the
cursor might be in a completely different spot. This is not the way newbies
like me will imagine that because we do make a relation with a text editor
where the cursor usually follows the text being read by the screen reader.
This is why when you pause with p and try to make operations related to the
cursor you might end up messing stuff ... because the fact you have paused the
audio does not mean that the cursor is where you are listening. In fact, what x
does as far as I know is perform a pause and automatically put the cursor where
you are listening.
Now as why this is not the default behavior I do not know ** note that this is
not a criticism but ratter something I have been curious about as why someone
would want the cursor in any point different than the place they are listening
at the moment.
But anyways understanding these concepts that by the way I have not read
anywhere, specially the fact that the cursor does not track what you are
listening has helped me a lot on my still beginning work with audacity.
btw and slightly off-topic your name Bonita means beautiful woman in
Portuguese, my native thong ... this is facinating .. I know many cases of
names in a given idiom meaning words in others.
Thanks,
Marlon
On 24/08/2017 05:31, Bonita Blankenberg wrote:
Gentlemen
Let it be known!
You are my heroes! It works, eureke, it works! The X is my new best friend,
thank you Marlon!
Have a lovely day,
Bonita
From: <mailto:audacity4blind-bounce@xxxxxxxxxxxxx>
audacity4blind-bounce@xxxxxxxxxxxxx [
<mailto:audacity4blind-bounce@xxxxxxxxxxxxx>
mailto:audacity4blind-bounce@xxxxxxxxxxxxx] On Behalf Of Marlon Brandão de Sousa
Sent: Thursday, August 24, 2017 4:19 AM
To: <mailto:audacity4blind@xxxxxxxxxxxxx> audacity4blind@xxxxxxxxxxxxx; David
Bailes
Subject: [audacity4blind] Re: Clips etc
In this task X (shift + x) is your friend. It will place the cursor right where
you are listening and also will pause the sound.
In previous versions of audacity it was shift + a,
On 23/08/2017 07:10, David Bailes wrote:
Hi Bonita,
you should be able to move the cursor to wherever you want to insert the audio,
and then paste it there. Where are you wanting to insert some audio, and are
not able to do so?
David.
On 22 August 2017 at 17:46, Bonita Blankenberg <
<mailto:bonitabonster@xxxxxxxxx> bonitabonster@xxxxxxxxx> wrote:
Hello Listers
I do hope my mail finds you all well.
My apologies if I’m asking a question that has already been covered, I’m a
newby user of Audacity.
My question is, how can I insert clips into a project without having to move to
the end of the track? At the moment, I can only add things to an existing
project, if I move my curser to the end of the track and then paste something.
Hope my question make sense.
I’m using Audacity with NVDA.
Your help will be valued.
Bonita