[ I resend the following message because it was previously sent to the
old mailing list, which is now down. ]
--- Begin Message ---
- From: Alexander Baier <alexander.baier@xxxxxxxxxxx>
- To: atreus@xxxxxxxxxxxxx
- Date: Sun, 17 Jan 2016 12:07:24 +0100
I bought the atreus a couple of month ago and assembled it with great
pleasure, but never got around to really using it until now.
As I have used a modified version of the Neo keyboard layout  over
the last couple of years, I would like to create a layout for the atreus
which is as close as possible to what I have been using.
I looked at the json layouts but did not really understand how to
achieve what I want to have. These are my main questions:
1. How do I specify umlauts? The C sources do not seem to have any
KEY_Ö or similar (at least I could not find any). Thus I assumed that I
cannot use umlauts in a json layout definition either.
2. Is it possible to define more than one momentary layer (like the fn
layer)? The standard layout defines the L2 as "sticky"(?), i.e. you
have to explicitly exit the layer by pressing a key. I did not
understand how the ["function", 2] entry in the json files work. Is
there documentation available that explains the json format in detail?
I would be happy to work through that.
--- End Message ---