Update: I reverse-engineered the layout of my keyboard and implemented it
in QMK: https://gist.github.com/pepijndevos/c7aef7a46d69e25b5064edb9e483d2ca
It was only next day that I realised I forgot some keys...
I also had to add/change 2 lines to the config:
OPT_DEFS += -DPCBDOWN
USB ?= /dev/ttyACM0
I used to use OS X a lot, so I had CMD on the thumb keys, but now that I
mostly use Linux I swapped them back.
Even though the old position was awkward, my muscles hate me now.
And CMD+SHIFT+C is kind of awkward now actually.
But the best part is that the LPC-link now works with the keyboard plugged
in.
On the other hand, now I have the same problem with the Teensy 3.
It seems anything with a bootloader on it kind of confuses it.
Pepijn
On Thu, Jan 12, 2017 at 6:55 PM, Johann Dahm <jdahm@xxxxxxxxxxxx> wrote:
On Jan 12, 2017, at 12:48 PM, pepijn de vos <pepijndevos@xxxxxxxxx>wrote:
I should try upgrading. I also found there is QMK, which has Atreus inthe mainline repo, so might be more up to date than Phil's TMK fork.
I’m also using the TMK fork. Let me know if you have luck with the new
firmware. - Johann
On Thu, Jan 12, 2017 at 6:37 PM, Harlan Shoop <harlan.shoop@xxxxxxxxx>wrote:
I've had a similar issue on my Macbook. It's an infrequent occurrence,and I haven't spent the time to try to reproduce--I just unplug/replug my
keyboard and move on. I know it has happened both when connected through a
USB hub and when connected directly to the Macbook.
wrote:
HS
On Thu, Jan 12, 2017 at 10:00 AM, Johann Dahm <jdahm@xxxxxxxxxxxx>
wrote:On Jan 12, 2017, at 3:09 AM, pepijn de vos <pepijndevos@xxxxxxxxx>
devices sometimes fail to work when my Atreus is plugged in. AndHowever, I have one issue that pops up from time to time: Other USB
sporadically the Atreus itself doesn't work after booting Windows.
it as it seems to work again after unplugging other devices. It very well
I run into this problem as well, on a MacBook Air. I never investigate
could be a vendor/product ID issue. Next time I see it occur, and have some
free time, I’ll take a look.
custom keyboard layout I wrote), and it's been great. (I should redo the
- Johann
Hey,
I've been using my Atreus for a loooong time. (so long that I lost the
layout to move some modifiers around, but I'm too lazy)
devices sometimes fail to work when my Atreus is plugged in. And
However, I have one issue that pops up from time to time: Other USB
sporadically the Atreus itself doesn't work after booting Windows.
connect a NXP LPC-Link to my Dell Latitude <numbers> running Windows 10
The past two days this happens reproducibly (very frustrating) when I
(for crappy commercial software). My keyboard and mouse continue to work,
and the LPC remains on, but LPCxpresso can't communicate with it. As soon
as I unplug the Atreus and replug the LPC, everything starts working again.
I've had this issue with other devices, but this one is very consistent in
failing.
been fixed since. (upstream or in your fork) I'm using your fork, but a
Possibly related: What is the status of your TMK fork? Maybe this has
version that's at least on or two years old.
Regards,
Pepijn
--
HS
