I doubt it's a conflict. My Atreus identifies as feed:6060 normally and
1ffb:0101 during reset, while the NXP thing enumerates as 0471:df55
I'm curious what firmware others that have this issue are using?
I should try upgrading. I also found there is QMK, which has Atreus in the
mainline repo, so might be more up to date than Phil's TMK fork.
Pepijn
On Thu, Jan 12, 2017 at 6:37 PM, Harlan Shoop <harlan.shoop@xxxxxxxxx>
wrote:
I've had a similar issue on my Macbook. It's an infrequent occurrence,
and I haven't spent the time to try to reproduce--I just unplug/replug my
keyboard and move on. I know it has happened both when connected through a
USB hub and when connected directly to the Macbook.
HS
On Thu, Jan 12, 2017 at 10:00 AM, Johann Dahm <jdahm@xxxxxxxxxxxx> wrote:
On Jan 12, 2017, at 3:09 AM, pepijn de vos <pepijndevos@xxxxxxxxx>wrote:
However, I have one issue that pops up from time to time: Other USBdevices sometimes fail to work when my Atreus is plugged in. And
sporadically the Atreus itself doesn't work after booting Windows.
I run into this problem as well, on a MacBook Air. I never investigate it
as it seems to work again after unplugging other devices. It very well
could be a vendor/product ID issue. Next time I see it occur, and have some
free time, I’ll take a look.
- Johann
custom keyboard layout I wrote), and it's been great. (I should redo the
Hey,
I've been using my Atreus for a loooong time. (so long that I lost the
layout to move some modifiers around, but I'm too lazy)
devices sometimes fail to work when my Atreus is plugged in. And
However, I have one issue that pops up from time to time: Other USB
sporadically the Atreus itself doesn't work after booting Windows.
connect a NXP LPC-Link to my Dell Latitude <numbers> running Windows 10
The past two days this happens reproducibly (very frustrating) when I
(for crappy commercial software). My keyboard and mouse continue to work,
and the LPC remains on, but LPCxpresso can't communicate with it. As soon
as I unplug the Atreus and replug the LPC, everything starts working again.
I've had this issue with other devices, but this one is very consistent in
failing.
been fixed since. (upstream or in your fork) I'm using your fork, but a
Possibly related: What is the status of your TMK fork? Maybe this has
version that's at least on or two years old.
Regards,
Pepijn
--
HS
