[atreus] Jeremy layout - how to switch to bootloader mode

  • From: Michael Wan <michaeltwan@xxxxxxxxxx>
  • To: atreus@xxxxxxxxxxxxx
  • Date: Tue, 20 Dec 2016 21:26:44 -0600

New Atreus user here, I'm experimenting with different layout of Atreus, if I 
switch to this Jeremy layout: 
https://github.com/technomancy/tmk_keyboard/blob/atreus/keyboard/atreus/keymap_jeremy.c


Is there anyway I can switch to the bootloader mode without shorting the pins? 
I looked at the layout file here however didn't seem to see the 
reset/bootloader option (I could be missing it as I’m still learning to 
decipher some of the symbols shown). 

http://www.keyboard-layout-editor.com/#/gists/cbed8979bba2df4419c738903a623546 ;
<http://www.keyboard-layout-editor.com/#/gists/cbed8979bba2df4419c738903a623546>
http://www.keyboard-layout-editor.com/#/gists/8956a18b508a78e93b9c38ec3fcccaa5 ;
<http://www.keyboard-layout-editor.com/#/gists/8956a18b508a78e93b9c38ec3fcccaa5>
http://www.keyboard-layout-editor.com/#/gists/6ed492b714a7f54eb1c5de09b87fd8c4 ;
<http://www.keyboard-layout-editor.com/#/gists/6ed492b714a7f54eb1c5de09b87fd8c4>
http://www.keyboard-layout-editor.com/#/gists/399ceb5624e8388e48a3a5eacac8e973 ;
<http://www.keyboard-layout-editor.com/#/gists/399ceb5624e8388e48a3a5eacac8e973>
http://www.keyboard-layout-editor.com/#/gists/7fd7dc24c7048316f3724b1893c64e89 ;
<http://www.keyboard-layout-editor.com/#/gists/7fd7dc24c7048316f3724b1893c64e89>

(above the links to the 5 layers on this layout) 

Reading the code, it has a layer 0 for bootloader, however I’ve not figured out 
how to expand on the BOOT layer, here are the snippets below:

// Each layer gets a name for readability, which is then used in the keymap 
matrix below.
#define BOOT  0 // Bootloader (not to be confused with default layer)
#define ALPH  0 // Alphabet Layer
#define NUMS  1 // Number Layer
#define FKEY  2 // Function Key Layer
#define CURS  3 // Cursor Layer
#define SYMB  4 // Symbol Layer


Thanks for any pointer. 

Michael


Other related posts: