Re: [artworks] "folding" a design
- From: Martin Wuerthner <lists@xxxxxxxxxxxxxxx>
- To: artworks@xxxxxxxxxxxxx
- Date: Wed, 10 Nov 2010 17:58:52 +0100
In message <51740f778fsmartgroups@xxxxxxxxx>
Tim Hill <smartgroups@xxxxxxxxx> wrote:
> C.J. wrote:
>>> what i'm trying to get is something shaped like a shallow V, with
>>> half of the card along each sloping arm.
> See www.timil.com/temp/card.zip
> Is one of those what you want? A Tent Card or a Greetings Card?
> In the first case I used the Perspectivize tool:
> Select an object, click on perpectivize tool and drag the control corners
> where they need to be. (Holding down Ctrl to lock one axis can help).
> In the second case I used the Skew tool:
> Select an object, select Skew, in the 'Skew' box select X or Y (Y in this
> case) and use the 9-box to select a corner which is not to move. Drag
> near the side which needs to move to where you want it.
> Is that what you meant?
I think what Jim wanted was to apply the folding effect to each of the
two landscape designs, the one at the top and the one at the bottom of
the poster.
Martin
--
---------------------------------------------------------------------
Martin Wuerthner MW Software lists@xxxxxxxxxxxxxxx
---------------------------------------------------------------------
------------------------------------------------------------
To change, suspend or cancel your subscription go to
//www.freelists.org/list/artworks
------------------------------------------------------------
Other related posts:
