In article <51209d9e8briscos@xxxxxxxxxxxxx>, Richard Ashbery <riscos@xxxxxxxxxxxxx> wrote: > > >> In message Richard Ashbery > > >> wrote: > > > > > >> > Is there away of locking a circle to the grid when drag-scaling? > > Try using the elipse tool and setting the radius as you want. > > I used this method to get a set of 10 concentric rings: > > Create first circle > > Clone it and modify the radius of the clone to the next size > Do you mean switch to Scale tool and drag on any corner handle to > resize the clone - I would agree that this works but to make the gap > between each concentric circle to be say exactly 1mm is next to > impossible without lock-to-grid. I'm not entirely sure what you are trying to do, but if you draw all the circles with a zero line width to start with and lock each circle in turn - I think you will find each circle will lock satisfactorily doing that - then select the lot and change the line width to whatever, it should work. ------------------------------------------------------------ To change, suspend or cancel your subscription go to //www.freelists.org/list/artworks ------------------------------------------------------------