Re: [artworks] Exporting graduated fills
- From: Martin Wuerthner <lists@xxxxxxxxxxxxxxx>
- To: artworks@xxxxxxxxxxxxx
- Date: Mon, 31 Mar 2008 10:06:31 +0200
In message <237958884f.steve@xxxxxxxxxxxxxxxxxxxxxxxxxxxx>
Steve Fryatt <lists@xxxxxxxxxxxxxxxxxx> wrote:
> I have an ArtWorks file containing a couple of closed shapes with
> graduated fills. Both seem to display correctly on screen, and when used
> in other applications via AWViewer. The file can be found at
> http://homepages.nildram.co.uk/~sfryatt/temp/awprob.zip
> If I export the image as a drawfile, the bottom shape is correctly
> graduated, while the top one is just a solid green. Can anyone suggest
> what I'm doing wrong? As far as I know, the two shapes were created in
> exactly the same way.
There must be something slightly wrong with the top fill that makes it
display correctly but export incorrectly. If I clone the bottom shape
and rotate it by 180 degress it is exported correctly. Alternatively,
editing the grad fill of the top shape ever so slightly or editing the
shape slightly restores it to normal as well. I will have a closer
look when I find the time, but probably not before the 2.8 release.
Martin
--
---------------------------------------------------------------------
Martin Wuerthner MW Software lists@xxxxxxxxxxxxxxx
---------------------------------------------------------------------
------------------------------------------------------------
To change, suspend or cancel your subscription go to
//www.freelists.org/list/artworks
------------------------------------------------------------
Other related posts:
