Am 21.02.2012, 19:03 Uhr, schrieb Chris Johnson <chris@xxxxxxxxxxxxxxxxxxxxx>:
In article <op.v91fh7nxj3f71s@xxxxxxxxxxxxxxxxxxx>, albutat <albutat@xxxxxx> wrote:Since the OS update results in my SCSI drive not being found I tried the following:ESC *conf.files.scsi *conf.scsifsdr.4 *conf.lmt.ip *dir scsi::4.$ *!bootGot me to the desktop after skipping the error box. Changed setting in configure CD 0 Floppy 0 SCSI 1 Menu clicked Save CMOS and rebooted.Why have you got 'Conventional SCSI' set to 1. Surely all the drives are attached via USB. I have SCSI set to 0 in Boot-configure-discs. Here is my Status listing (why do we still need things like baud and TV?). *status Configuration status: Baud 4 Boot No Caps Data 4 Delay 32 No Directory DumpFormat 4 FontSize 1020K Ignore 10 Language 11 Mode Auto MonitorType Auto MouseStep 2 MouseType 7 Print 1 PrinterBufferSize 1K Quiet RamFSSize 0K Repeat 8 RMASize 256K ScreenSize 160K Scroll SpriteSize 0K Sync 0 SystemSize 32K TV 0,1 WimpMode Auto FileSystem SCSI Truncate on Territory 1 GMT TimeZone +0:0 WimpFlags 111 WimpFont 0 WimpDragDelay 5 * 1/10 second WimpDragMove 32 OS Units WimpDoubleClickDelay 10 * 1/10 second WimpDoubleClickMove 32 OS Units WimpAutoMenuDelay 10 * 1/10 second WimpMenuDragDelay 10 * 1/10 second WimpIconBarSpeed 200 OS Units / second WimpIconBarAcceleration 100 OS Units / second² WimpSpritePrecedence RAM WimpButtonType Click WimpIconiseButton On WimpAutoFrontIconBar On WimpAutoFrontDelay 5 * 1/10 second WimpAutoScrollDelay 5 * 1/10 second WimpClickSubmenu Off Cache On FontMax1 16 points FontMax2 128 points FontMax3 128 points FontMax4 7 points FontMax5 7 points FontMax 4096k Country UK SoundSystem 16bit Oversampled SoundDefault 1 7 1 SCSIFSDirCache 255K SCSIFSDrive 0 BootNet Off FS <unset> LMTransport IP LMNameServer <unset> CDROMBuffers 256K CDROMDrives 1 FreewayAutoAddress On Use *Configure to set the options. *
Using a Pre-Armini OS ROM I get the following: *status Configuration status: Baud 4 Boot No Caps Data 4 Delay 32 No Directory DumpFormat 4 FontSize 256K Ignore 10 Language 11 Mode Auto MonitorType Auto MouseStep 2 MouseType 7 Print 1 PrinterBufferSize 1K Quiet RamFSSize 0K Repeat 8 RMASize 256K ScreenSize 160K Scroll SpriteSize 0K Sync 0 SystemSize 32K TV 0,1 WimpMode Auto FileSystem SCSI Truncate on Territory 1 GMT TimeZone +1:0 WimpFlags 111 WimpFont 8 WimpDragDelay 5 * 1/10 second WimpDragMove 32 OS Units WimpDoubleClickDelay 10 * 1/10 second WimpDoubleClickMove 32 OS Units WimpAutoMenuDelay 10 * 1/10 second WimpMenuDragDelay 10 * 1/10 second WimpIconBarSpeed 200 OS Units / second WimpIconBarAcceleration 100 OS Units / second² WimpSpritePrecedence RAM WimpButtonType Click WimpIconiseButton Off WimpAutoFrontIconBar On WimpAutoFrontDelay 5 * 1/10 second WimpAutoScrollDelay 5 * 1/10 second WimpClickSubmenu Off Cache On FontMax1 16 points FontMax2 36 points FontMax3 36 points FontMax4 16 points FontMax5 0 points FontMax 4096k Country UK SoundSystem 16bit Oversampled SoundDefault 1 7 1 SCSIFSDirCache 255K SCSIFSDrive 4 BootNet Off FS <unset> LMTransport IP LMNameServer <unset> CDROMBuffers 256K CDROMDrives 0 Use *Configure to set the options. Running the Armini OS3 for BB tool completely bricks my BB-xM Rev B. Checking the µSD on my PC the files seem to have been written correctly to the card but the BB refuses to boot from them. Patric --- To alter your preferences or leave the group, visit //www.freelists.org/list/armini-support List-related queries to support@xxxxxxxxxxxx