A Rawnsley, on 21 Feb, wrote: > > As I mentioned in previous messages, most users should not have problems > with loading CMOS settings after the update - we've made sure to update > the necessary files on your SD card. > > However, it is worth explaining why this is necessary. 5.18 supports > Robert Sprowston's "hardware cmos RAM" add-on, which is used in preference > to files on your SD card. These will be available shortly (hopefully at > the show this weekend) as a DIY upgrade that we'll be telling you about. > These should eliminate all CMOS issues and give a CMOS experience just > like a RiscPC. > > In the meantime, 5.18 allows the cmos settings to be loaded from the card, > if the hardware-add-on is not present. > > This is achieved via an extra line in the "Uenv.txt" file. A recent > "u-boot.bin" file is needed for this, but as far as we know, all ARMini > users should have suitable versions already. > > For older Beagleboard users, we have uploaded "OS3 for BB.zip" to the > Beagleboarders folder on the private site which contains the extra files. > > It is *just* possible that very early ARMini owners may benefit from this > too, as the early SD cards may have had an old "u-boot.bin" on them. At > this stage, I'm honestly not sure, and we don't have any stock of those > (due to stock shortages, I even had to sell my on personal prototype). If > you suspect your CMOS settings aren't loading, try that update and let us > know. I have to jump in here, I know you prefer to have difficulties dealt with in private but running OS3forBB on my ARMini has left me with a totally dead ARMini. -- David Pitt iMac, Lion, MessengerPro --- To alter your preferences or leave the group, visit //www.freelists.org/list/armini-support List-related queries to support@xxxxxxxxxxxx