On 30 Oct, Doug Webb <doug.j.webb@xxxxxxxxxxxxxx> wrote: > In message <522a61a065support@xxxxxxxxxxxx> > ARMini Support <support@xxxxxxxxxxxx> wrote: > [snip] > >> Just skipping over this file allows an extraction but without that > >> file. > > If you "Retry" it extracts is ok the second time round here. Not sure > > what's going on there. > Yes that does the trick thanks. Great. > >> Finally the !Newicons application does not seem to change the SCSI > >> icons to to the new ones even though i have ROM protection unticked. > >> I have tried the application out on the Iyonix and it does change the > >> default icons to the new ones. > > I think there's a mistake in making the skeleton !Boot here as > > !NewIcons should be in !Boot.Choices.Boot.Tasks whereas the zipfile > > has it in !Boot.Choices.Tasks. Move it to the right place and it > > should do the trick. > Tried that and plugging in a USB stick I get the original icon not the > new one and an error message: > Internal error: abort on data transfer at &FC184428170. > Trying it again with Alignment exceptions set to off stops the error > message but no change in the icons as they are still the old ones. > So perhaps my "harddisc" as SCSI 4 as per below is causing some > confusion? > Let me know if I can try anything else to narrow the issue down. Can you reboot, then press F12 and type *RMFaster SCSIFiler Return to the desktop and then try plugging in a USB pen. The standard ARMini boot has an obeyfile which performs the RMFaster in PreDesk which seems to have got missed out of the skeleton !Boot for BeagleBoarders. > >> I do not have a USBstick attached as I am booting from from a > >> harddisc which uses a USB to Sata interface and shows up on my > >> Beagleboard as HardDisc4 using SCSI Disc 4. > > Apologies for the slight hiccups, we'll get fixed archives uploaded as > > soon as we're back in the office and get chance to fix it! > Not a problem and thanks for the quick response and I'm sure that no > one will be grudge the RComp team a well earned rest. Thanks. Support --- To alter your preferences or leave the group, visit //www.freelists.org/list/armini-support List-related queries to support@xxxxxxxxxxxx