[argyllcms] Re: using Lab readings instead of a supported reader

  • From: Klaus Karcher <lists@xxxxxxxxxxxxxxxxx>
  • To: argyllcms@xxxxxxxxxxxxx
  • Date: Sat, 27 Nov 2010 11:26:58 +0100

dmg wrote:
Where can I find an example file that txt2ti3 reads? That would help
me understand what txt2ti3 is doing (and potentially modify it
for converting simple lab readings into a ti3).

here are some rather minimalistic examples.

You can try them with

txt2ti3 test-combined.txt testcomb
txt2ti3 test-CMYK.txt test-XYZ.txt testxyz
txt2ti3 test-CMYK.txt test-LAB.txt testlab

Klaus
NUMBER_OF_FIELDS 8
BEGIN_DATA_FORMAT
SAMPLE_ID CMYK_C CMYK_M CMYK_Y CMYK_K XYZ_X XYZ_Y XYZ_Z 
END_DATA_FORMAT

NUMBER_OF_SETS 3
BEGIN_DATA
1 0.0000 0.0000 0.0000 0.0000 84.552 87.683 74.717 
2 0.0000 0.0000 0.0000 0.0000 84.552 87.683 74.717 
3 0.0000 0.0000 0.0000 0.0000 84.552 87.683 74.717 
END_DATA
NUMBER_OF_FIELDS 5
BEGIN_DATA_FORMAT
SAMPLE_ID CMYK_C CMYK_M CMYK_Y CMYK_K
END_DATA_FORMAT

NUMBER_OF_SETS 3
BEGIN_DATA
1 0.0000 0.0000 0.0000 0.0000 
2 0.0000 0.0000 0.0000 0.0000 
3 0.0000 0.0000 0.0000 0.0000 
END_DATA
NUMBER_OF_FIELDS 4
BEGIN_DATA_FORMAT
SAMPLE_ID XYZ_X XYZ_Y XYZ_Z 
END_DATA_FORMAT

NUMBER_OF_SETS 3
BEGIN_DATA
1 84.552 87.683 74.717 
2 84.552 87.683 74.717 
3 84.552 87.683 74.717 
END_DATA
NUMBER_OF_FIELDS 4
BEGIN_DATA_FORMAT
SAMPLE_ID LAB_L LAB_A LAB_B 
END_DATA_FORMAT

NUMBER_OF_SETS 3
BEGIN_DATA
1 95.03   0.02  -2.08 
2 95.03   0.02  -2.08 
3 95.03   0.02  -2.08 
END_DATA

Other related posts: