[argyllcms] Re: spyder2
- From: Alexandre Prokoudine <alexandre.prokoudine@xxxxxxxxx>
- To: argyllcms@xxxxxxxxxxxxx
- Date: Thu, 12 Mar 2009 00:42:59 +0300
On Tue, Mar 10, 2009 at 4:34 AM, Graeme Gill wrote:
> Alexandre Prokoudine wrote:
>
>> Error - new_dispord() failed with "Instrument Access Failed"
>
> There is usually a different message if permissions is the issue.
>
>> What details do you need to know to figure out what's wrong?
>
> "dispcal -D2" output.
Checking XRandR 1.2 VideoLUT access
XRandR 1.2 is faulty - falling back to older extensions
get_displays checking for Xinerama
Display 0 name = ':0.0'
Calibrate a Display, Version 1.0.3
Author: Graeme W. Gill, licensed under the GPL Version 3
Diagnostic: Output filname parameter not found
usage: dispcal [options] outfile
-v [n] Verbose mode
-display displayname Choose X11 display name
-d n[,m] Choose the display n from the following list (default 1)
Optionally choose different display m for VideoLUT access
Checking XRandR 1.2 VideoLUT access
XRandR 1.2 is faulty - falling back to older extensions
get_displays checking for Xinerama
Display 0 name = ':0.0'
1 = 'DELL 2007FP at 0, 0, width 1600, height 1200'
-c listno Set communication port from the following list (default 1)
1 = 'usb:/bus0/dev8 (ColorVision Spyder2)'
2 = '/dev/ttyS0'
3 = '/dev/ttyS1'
4 = '/dev/ttyUSB0'
Alexandre
Other related posts:
