[argyllcms] Re: monitor calibration - strange behavior

  • From: Graeme Gill <graeme@xxxxxxxxxxxxx>
  • To: argyllcms@xxxxxxxxxxxxx
  • Date: Mon, 18 Feb 2013 13:07:07 +1100

Alberto Ferrante wrote:

> To me it looks like the problem is somehow in dispcal -r

Hi,
        that doesn't make a whole lot of sense - -r merely uses
the current calibration curves. If you are using different
calibration curves/profiles, then of course the results will
vary with each different calibration, but if you measure using
the same curves/profile, -r should be just as stable as -R.

Graeme Gill.


Other related posts: