Is there a free software that can show white point, black point, gamma, etc from any monitor profile (ICM)? On Mon, Aug 23, 2010 at 10:32 AM, János, Tóth F. <janos666@xxxxxxxxxx>wrote: > No exactly. See examples: > "Smooth" (U2410 Standard mode with 255-255-255): > http://img12.tar.hu/janos666/img/82927235.png > "Immediate" (l220x with 255-255-255): > http://img12.tar.hu/janos666/img/82927237.png ; > "Crossing" (U2410 sRGB mode with 255-255-255): > http://img12.tar.hu/janos666/img/82927236.png > (Ignore the starting sections on these examples!) > > The Standard mode may worth to be optimized with OSD Gains because the > lines don't cross each others. These curves will be nearly coherent after > RGB Gain setup. > The l220x is questionable. I didn't waste my time to test it. > RGB Gain controls are useless in sRGB mode because the curves cross each > others. So, these curves won't be coherent after you set the white point > with the Gains. (But the maximum achievable contrast ratio will be lower.) > -- Adam Kielcz