Is this what you meant?
the first two times I just aborted, the second two times I pressed
space to calibrate on the white reference before aborting.
jan@Mayhem:~$ spotread
Spot read needs a calibration before continuing
Place the instrument on its reflective white reference S/N 1090386,
and then hit any key to continue,
or hit Esc or Q to abort:
Spot read got abort or error from calibration
jan@Mayhem:~$ spotread
Spot read needs a calibration before continuing
Place the instrument on its reflective white reference S/N 1090386,
and then hit any key to continue,
or hit Esc or Q to abort:
Calibration complete
Place instrument on spot to be measured,
and hit [A-Z] to read white and setup FWA compensation (keyed to
letter)
[a-z] to read and make FWA compensated reading from keyed reference
'r' to set reference, 's' to save spectrum,
'f' to report cal. refresh rate, 'F' to measure refresh rate
'h' to toggle high res., 'k' to do a calibration
Hit ESC or Q to exit, instrument switch or any other key to take a
reading: ^[
Spot read stopped at user request!
Hit Esc or Q to give up, any other key to retry:
jan@Mayhem:~$ spotread
Spot read needs a calibration before continuing
Place the instrument on its reflective white reference S/N 1090386,
and then hit any key to continue,
or hit Esc or Q to abort:
Calibration complete
Place instrument on spot to be measured,
and hit [A-Z] to read white and setup FWA compensation (keyed to
letter)
[a-z] to read and make FWA compensated reading from keyed reference
'r' to set reference, 's' to save spectrum,
'f' to report cal. refresh rate, 'F' to measure refresh rate
'h' to toggle high res., 'k' to do a calibration
Hit ESC or Q to exit, instrument switch or any other key to take a
reading: ^[
Spot read stopped at user request!
Hit Esc or Q to give up, any other key to retry:
jan@Mayhem:~$
On Tue, 2018-05-15 at 22:47 +1000, Graeme Gill wrote:
Jan Drewes wrote:
dispread: Error - new_disprd failed with 'Instrument Access Failed'
Hi, what happens if you run spotread twice in a row ?
i.e run spotread and then escape to exit, then do it again ?
Cheers, Graeme Gill.
Attachment:
signature.asc
Description: This is a digitally signed message part
