[argyllcms] Re: i1d2 size
- From: Ivan Tsyba <ivantsyba@xxxxxxxxx>
- To: "argyllcms@xxxxxxxxxxxxx" <argyllcms@xxxxxxxxxxxxx>
- Date: Mon, 3 Feb 2014 18:26:20 +0200
Maybe this scan will help you (some perspective distortion present):
https://www.dropbox.com/s/si1dmdayfwineoi/i1d2_footprint.jpg
2014-02-03 Graeme Gill <graeme@xxxxxxxxxxxxx>:
> Pascal de Bruijn wrote:
>
> > I'm aware this is a little offtopic as well, but could anybody perhaps
> > measure (phsyical dimensions) an i1d2 or colormunki smile for me?
>
> Hi,
> I'm not quite sure what you're after - perhaps a shadow template
> for positioning ?
>
> You could approximate it by a 31mm radius circle plus a 22mm radius circle
> at a center offset of 29mm.
> The Sensors exist within a depression about 15mm in diameter in the center
> of the 31mm radius circle.
>
> Graeme.
>
>
Other related posts:
