[argyllcms] Re: collink segfaults

  • From: Graham White <g.graham.white@xxxxxxxxx>
  • To: argyllcms@xxxxxxxxxxxxx
  • Date: Thu, 3 Aug 2017 15:43:56 +0100

I'll give it a try. I haven't had a good compiling-from-source adventure for some time.

Thanks
Graham

On 03/08/17 14:19, Graeme Gill wrote:

Graham White wrote:
I'm running Argyll (1.9.2) on Ubuntu (64 bit, 17.04), with the argyllcms
ubuntu pacckages. I have been trying to run collink using commands like
collink -v3 -qm -s -ip -op profile1.icc profile2.icc profile3.icc
and it seems to segfault every time: running it with -v3 shows that it
goes through all the stages of making the profile, but then it segfaults
leaving behind a zero bite file called profile3.icc

This is not behaviour that I have found with any of the other Argyll tools.

Any ideas?

Hi,
        I'd probably need to be able to reproduce the crash to figure it out.
Possibly it's something I have already fixed. If you are able to build
it (i.e. you have a usable copy of Jam available), then you could
try compiling this <http://www.argyllcms.com/Argyll_dev_src.zip>
and see if it has the same problem.

Cheers,
        Graeme Gill.



--
Graham White
Electronic Engineering and Computer Science
Queen Mary, University of London
http://www.eecs.qmul.ac.uk/~graham

Other related posts: