Ok. I just used the txt file of Lab values from xRite following your format and that worked. Thank you. Alex On May 5, 2014, at 11:22 AM, Graeme Gill <graeme@xxxxxxxxxxxxx> wrote: > Alex Jamison wrote: > >> The instructions show the command: scanin [options] input.tif recogin.cht >> valin.cie but >> I see no file of values for the SG target in the 'ref' folder, either in cie >> or txt >> format. > > Hi, > you need to supply the reference information. Usually the manufacturer > of the test > chart provides it to you. > > See <http://www.argyllcms.com/doc/Scenarios.html#PS2> in the section > headed "Taking readings from a scanner or camera". > >> Running colprof with V1.5.1, I used options "-qm -am -u". Of those the only >> option that >> remains in V1.6.3 is "u". I don't know what qm or am were for as the >> instructions have >> been replaced, so I don't know whether they were important or whether they >> have been >> superseded. > > I'm not sure what you mean. Little has changed in respect to these options: > > -q: <http://www.argyllcms.com/doc/colprof.html#q> > -a: <http://www.argyllcms.com/doc/colprof.html#a> > -u: <http://www.argyllcms.com/doc/colprof.html#u> > > Graeme Gill. >