[argyllcms] [argyllcms] Re: bin/average: averaging and possible outlier elimination for three or more .ti3 sets?
- From: Nikolay Pokhilchenko <nikolay_po@xxxxxxx>
- To: argyllcms@xxxxxxxxxxxxx
- Date: Sun, 30 Aug 2009 21:59:25 +0400
I've noticed many times that chartread with i1Pro may misread patches when
there are non-contrast or too narrow spacers between patches. It likely may
took a place in the case when there was no right preliminary profile for *.ti2
data and printtarg places patches unoptimal way.
Another reason to misread may be a blank paper strip between patches and sheet
edge if the edge is crossed by instrument while reading. In such case the strip
cut off straight on patch column edge may help.
Other related posts:
- » [argyllcms] [argyllcms] Re: bin/average: averaging and possible outlier elimination for three or more .ti3 sets? - Nikolay Pokhilchenko