Looks like the issue is at line 155. The buffers being too small should generate a warning. Not that skszie should be 500 with the corresponding change at line 127. John > 2013/10/5 János, Tóth F. <janos666@xxxxxxxxxx>: > > It sounds like this is the same instrument access crash issue which I have. > > I will try your fix with ICL14 as well. > > > > > > 2013/10/5 <xacc.ide@xxxxxxxxx> > > > >> Hi > >> > >> I got everything built very easily using a few versions of VC. The problem > >> is it would never run, either crashing or the JIT debugger alerting me to a > >> buffer overrun (in later versions). This always happens during icoms stuff. > >> > >> I found the issue was the buffers in icoms_nt.c lines 101 and 105 were too > >> small. Being lazy, I just increased these buffers (and sizes) by a factor > >> of > >> 10, and the executables will happily run. > >> > >> If you need more info about what is being read there, shout. > >> > >> Cheers > >> > >> leppie > >> > > >