Hello Roger! I've successfully saw 5 points from your example. You need to: 1. replace all commas by dots in your data file, because Argyll CMS expects dots as decimal point. 2. run "verify.exe -W Your_file.txt Your_file.txt" That's all. Now you can analyze the data as vrml. -----Original Message----- From: Roger <graxx@xxxxxxxxxxxx> To: argyllcms@xxxxxxxxxxxxx Date: Tue, 24 Mar 2009 21:17:36 -0400 Subject: [argyllcms] VRML > Hello everyone, > > I have a CGATS file with a bunch of Lab data. Here's an excerpt: > > ---- > CGATS.17 > ORIGINATOR "BabelColor PatchTool, version 2.6.0 b150" > LGOROWLENGTH 31 > CREATED "2009-03-23" # Time: 07:29:23 > INSTRUMENTATION "Unknown" > MEASUREMENT_SOURCE "Illumination=Unknown ObserverAngle=Unknown > WhiteBase=Abs Filter=Unknown" > WEIGHTING_FUNCTION "ILLUMINANT, D50" > WEIGHTING_FUNCTION "OBSERVER, 2 degree" > KEYWORD "SAMPLE_ID" > KEYWORD "SAMPLE_NAME" > NUMBER_OF_FIELDS 5 > BEGIN_DATA_FORMAT > SAMPLE_ID SAMPLE_NAME LAB_L LAB_A LAB_B > END_DATA_FORMAT > NUMBER_OF_SETS 1600 > BEGIN_DATA > 1 2.5R_3/10 31,584 51,232 14,716 > 2 2.5R_4/6 40,187 31,385 11,349 > 3 2.5R_4/8 41,890 40,674 13,758 > 4 2.5R_4/10 41,649 49,274 15,781 > 5 2.5R_4/12 42,486 57,764 18,497 > --- > > Is there a way I could turn this file into a VRML file for viewing under > Windows? I know Kai's excellent ICC Examine will do the job perfect but it > only runs on MacOSX and I need to make this run on a WinXP machine, with > just the Cortona Plug-in, say, under Internet Explorer. > > I've looked at targen but I don't think it will do what I want. > > Regards / Roger Breton > > >