[argyllcms] Re: Support for i1Pro2
- From: Graeme Gill <graeme@xxxxxxxxxxxxx>
- To: argyllcms@xxxxxxxxxxxxx
- Date: Mon, 21 Jul 2014 12:10:38 +1000
János, Tóth F. wrote:
> Is there an undocumented chartread command line parameter or an
> enviroment variable which forces the i1Pro2 to use it's white LED
> alone to act like a device with an U.V. filter? (Is this even
> possible?)
Hi,
The i1pro2 doesn't use a white LED - it intentionally uses an incandescent lamp,
just as the i1pro does, so unless it is fitted with a UV filter, you will
get UV included measurements. The pro2 has a separate UV LED, which allows
better characterization of FWA/OBE. Currently I'm not making use of that
in Argyll.
> I tried -fM2 but chartread said it's not supported with the i1Pro2.
> What am I missing?
You capture the spectral readings by default in chartread, and then use -fM2 in
colprof.
> I found the workaround for the -fM2 in a freelist thread: manually
> fixing the instrument name in the ti3 file.
I don't think so.
Graeme Gill.
Other related posts:
