[argyllcms] Re: Spyder2 stopped working - device, system or ArgyllCMS broken?

  • From: Jan-Erik Skata <jeskata@xxxxxxxxx>
  • To: argyllcms@xxxxxxxxxxxxx
  • Date: Sun, 3 Jul 2011 21:31:50 +0300

On Sun, Jul 3, 2011 at 4:30 PM, Jan-Erik Skata <jeskata@xxxxxxxxx> wrote:
> On Thu, Jun 30, 2011 at 4:23 AM, Graeme Gill <graeme@xxxxxxxxxxxxx> wrote:
>> Jan-Erik Skata wrote:
>>> What would be the best way to extract a useful USB debug trace for the
>>> kernel devs?
>> You need to get a usbmon trace. It would be nice to have
>> a trace for working and non-working to compare.
>> See <http://www.mjmwired.net/kernel/Documentation/usb/usbmon.txt>
>>    <http://groups.google.com/group/microdia/web/usbmon-user-guide>
>> Graeme Gill.
> I have now dumped the logs on both non-working (ASRock P67 Pro3) and
> working (ThinkPad X40) machines.
> Uploaded them to http://users.abo.fi/jskata/spyder2_argyllcms/ , along
> with dispcal output with -D5.
> Have now tried all USB ports on the motherboard, also the internal
> ones, none work with Spyder2.
> Also tried setting up USB over IP served from the laptop but it did
> not work, same error. Could this be due to some too long delays,
> introduced both in hubs and usbip?

Plugged in an old USB PCI card and it works on that...

Other related posts: