[argyllcms] Re: !_Spec2cie.exe does not work with ti3 with quantity of channels more than four.

From: Gerhard Fuernkranz <nospam456@xxxxxx>
To: argyllcms@xxxxxxxxxxxxx
Date: Wed, 24 Feb 2010 00:04:58 +0100

Graeme Gill wrote:
> Sorry, spec2cie is hard coded for RGB & CMYK, so it needs a bit of
> re-writing to work. Perhaps Gerhard could help ?

I did take a brief look at the sources. Looks like using the xcolorants
abstraction is the key for a more generic solution. Well, should not be
too difficult to change it, granted that I find some free time...

Regards,
Gerhard

Follow-Ups:
- [argyllcms] Re: !_Spec2cie.exe does not work with ti3 with quantity of channels more than four.
  - From: Dmitriy Chaplygin

References:
- [argyllcms] !_Spec2cie.exe does not work with ti3 with quantity of channels more than four.
  - From: Dmitriy Chaplygin
- [argyllcms] Re: !_Spec2cie.exe does not work with ti3 with quantity of channels more than four.
  - From: Graeme Gill

Other related posts:

» [argyllcms] !_Spec2cie.exe does not work with ti3 with quantity of channels more than four.- Dmitriy Chaplygin
» [argyllcms] Re: !_Spec2cie.exe does not work with ti3 with quantity of channels more than four.- Graeme Gill
» [argyllcms] Re: !_Spec2cie.exe does not work with ti3 with quantity of channels more than four.- Dmitriy Chaplygin
» [argyllcms] Re: !_Spec2cie.exe does not work with ti3 with quantity of channels more than four. - Gerhard Fuernkranz
» [argyllcms] Re: !_Spec2cie.exe does not work with ti3 with quantity of channels more than four.- Dmitriy Chaplygin