[argyllcms] Re: Reprofiling
- From: Dimitrije Zivkovic <migraf.keramika@xxxxxxxxx>
- To: argyllcms@xxxxxxxxxxxxx
- Date: Sat, 2 Mar 2013 10:30:37 +0100
Hi
Thanks for advice, but I already tried workflow with calibration.
But problem is density, what is probably not possible to solve with profile.
However Thanks
Dimitrije Zivkovic
On Mar 1, 2013, at 11:11 PM, Graeme Gill <graeme@xxxxxxxxxxxxx> wrote:
> Dimitrije Zivkovic wrote:
>
>> For example: I have a Profile which is made with 2400 patches, but printer
>> behavior is change a little bit.
>> Is any possibility to print a small number of patches and do reprofiling of
>> existing profile?
>
> Hi,
>
> that's really what calibration is for. See
> <http://www.argyllcms.com/doc/Scenarios.html#PC1>,
> but of course you have to have decided to use calibration
> from the start!
>
> Graeme Gill.
>
>
Other related posts:
