Interesting: changing the extension in txt, Patchtool sees the values as XYZ data, is correct? There is a way to have RGB data in ti3 file? Thank you Marco Il giorno 11/mar/2011, alle ore 20.27, Derek Wells ha scritto: > > Hi Marco, > > The image is too small; my understanding is that scanin adds a "buffer" to > the > detected edges for safety; > > Adding a black border and enlarging the resulting image to a few hundred > pixels > (500 pixels along the long edge) gives the attached .ti3 file. > > When enlarging, I used "nearest neighbour" in photoshop to preserve the hard > > edges of the patches. > > I used the command line: > scanin -dipn ColorLabTarget.tif ColorChecker.cht ColorChecker.cie > > I hope this helps. > > Derek > >> -----Original Message----- >> From: argyllcms-bounce@xxxxxxxxxxxxx >> [mailto:argyllcms-bounce@xxxxxxxxxxxxx] On Behalf Of Marco Noldin >> Sent: 11 March 2011 17:16 >> To: argyllcms@xxxxxxxxxxxxx >> Subject: [argyllcms] Re: RGBtoTXT >> >> I have tried Scanin but I have not obtain any result. I >> attach an example if someone want to try to convert it in ti3 file >> >> Thank you >> Marco >> > <ColorLabTarget.ti3>