[argyllcms] Re: Profile lookup with fixed device values

  • From: Gerhard Fuernkranz <nospam456@xxxxxx>
  • To: argyllcms@xxxxxxxxxxxxx
  • Date: Thu, 16 Apr 2020 17:10:17 +0200

Am 16.04.20 um 10:16 schrieb Alexey Gribunin:

> Are you able to do the overprint in a way,
> such that the raster and ink

> interactions will be the same as if all colorants had been
> printed in
the first place? If you can't, the profile
> may not be valid for a later
amending overprint.

Yes, that's right.
If the ink sequence used during profiling
was (MK or KM)+(CY or YC),
the problem has the strict solution.
If so, then printing with the same ink sequence should work correctly.
If not - there will be only approximate solution.

Other potential issue IMO depend on the printing technology. Inkjets may have 
more than 4 colorants although the dirver/RIP is just fed with CMYK. It is 
proprietary how CMYK are separated to the native colorants then. Stochastic 
inkjet screens may invole a vector quantization, dithering all colorants 
together, and not independently. For a press, I guess the alignment of the 
rasters also matters, in addition to the order of the separations.

Regards,
Gerhard



Other related posts: