[argyllcms] Re: Profile Evaluation

  • From: "Roger Breton" <graxx@xxxxxxxxxxxx>
  • To: <argyllcms@xxxxxxxxxxxxx>
  • Date: Tue, 14 Jun 2016 16:08:50 -0400

That's precisely what I do, Alan, I capture the output to a text file I then
bring into Excel.
Otherwise, it's no manageable.

/ Roger

-----Original Message-----
From: argyllcms-bounce@xxxxxxxxxxxxx [mailto:argyllcms-bounce@xxxxxxxxxxxxx]
On Behalf Of Alan Goldhammer
Sent: Tuesday, June 14, 2016 3:55 PM
To: argyllcms@xxxxxxxxxxxxx
Subject: [argyllcms] Re: Profile Evaluation

If you create a logfile it imports into Excel where it is much easier to
view the individual data points.  It was not clear to me how you were
reading the print out of the information.  I do this for all my
printer/paper profiles and it is quite useful

Alan

-----Original Message-----
From: argyllcms-bounce@xxxxxxxxxxxxx [mailto:argyllcms-bounce@xxxxxxxxxxxxx]
On Behalf Of Roger Breton
Sent: Tuesday, June 14, 2016 11:46 AM
To: argyllcms@xxxxxxxxxxxxx
Subject: [argyllcms] Re: Profile Evaluation

Graeme,

You only get point by point detail using "-v 2" though.

I do use -v2 verbose level.

Perhaps you didn't capture the whole output ?

The ti1 file was created with "targen -d3 -f200 out".
I'm told there are 4 white patches and 4 black patches.
So I should be getting 192 patches.
Indeed, targen states "192 far spread points to add".
 
Yet, profcheck only shows 148 values.

Beats me.

/ Roger






Other related posts: