On 12/13/07, Gerhard Fuernkranz <> wrote: > > Is the "COLOR_REP" in the cyan.ti3 file really "C_XYZ" and not "CMY_XYZ"? > > Regards, > Gerhard > The ti3 file I posted is unchanged output from printread. I have also played some more with the targen command, and I have now managed to create the whole linearization target in one step. Earlier I created one file for each color. But there is a problem. I expected to get 40 patches from each c,m,y,k and cmy, but I only get 40 from cyan. My command is: targen -d 2 -D 4 -f 0 -s 0 -s 40 -g 40 -e 0 -m 0 lin-target printtarg -v -e -ii1 -r -pA4 lin-target The results is: 40 c 39 m 39 y 39 k 39 cmy It drops the 0 patch on all stripes besides cyan. ==> c <== 1 "A1" 0.0000 0.0000 0.0000 0.0000 96.420 100.00 82.490 2 "A2" 2.5641 0.0000 0.0000 0.0000 91.731 95.445 80.574 ==> m <== 41 "B20" 0.0000 2.5641 0.0000 0.0000 93.175 95.501 79.019 42 "B21" 0.0000 5.1282 0.0000 0.0000 90.031 91.142 75.656 ==> y <== 80 "D17" 0.0000 0.0000 2.5641 0.0000 95.286 98.945 78.519 81 "D18" 0.0000 0.0000 5.1282 0.0000 94.187 97.922 74.672 ==> k <== 119 "F14" 0.0000 0.0000 0.0000 2.5641 91.120 94.501 77.964 120 "F15" 0.0000 0.0000 0.0000 5.1282 85.985 89.173 73.578 ==> cmy <== 158 "H11" 2.5641 2.5641 2.5641 0.0000 87.601 90.189 73.469 159 "H12" 5.1282 5.1282 5.1282 0.0000 79.525 81.245 65.354 Is this a bug, or am I misuse targen, or have wrong expectations?