[argyllcms] Re: Problems with spec2cie
- From: "Lars Tore Gustavsen" <lars.tore@xxxxxxxxxxxxxx>
- To: "Hal V. Engel" <hvengel@xxxxxxxxxxx>
- Date: Thu, 13 Dec 2007 11:49:25 +0100
On Dec 13, 2007 10:53 AM, Hal V. Engel <hvengel@xxxxxxxxxxx> wrote:
>
>
> You can have printread create a Lab file directly and you don't ned to use
> spec2cie. Use a command like:
>
> printread -c2 -n -l linearCMY
>
> and you will get a nice cgats file with Lab data only.
>
> Hal
>
Thanks, and stupid me not reading the documentation god enough again.
I found out before you replayed that the verify tool also give me Lab
values. So now I have a bunch of slightly different values to choose
from. :-)
Like this from the darkest cyan patch:
spotread without fwa
44.589454 -23.955453 -68.997829
spotread with fwa
44.589729 -23.994011 -68.986453
verify -v -f -i D50 -o 1931_2 cyan.ti3 cyan.ti3
43.127995 -22.067060 -67.820096
verify -v -i D50 -o 1931_2 cyan.ti3 cyan.ti3
43.001248 -22.237078 -67.798524
printread -n -l cyan
43.121 -22.115 -67.459
Other related posts:
