Hi,I am trying to use the latest beta drop on a SuSE 10.2 box. I copied the udev entries to the right place.
Syslog shows the device being foundFeb 18 07:51:05 cray kernel: usb 2-1: new low speed USB device using uhci_hcd and address 2 Feb 18 07:51:05 cray kernel: usb 2-1: new device found, idVendor=0971, idProduct=2003 Feb 18 07:51:05 cray kernel: usb 2-1: new device strings: Mfr=1, Product=2, SerialNumber=0
Feb 18 07:51:05 cray kernel: usb 2-1: Product: Eye-One display Feb 18 07:51:05 cray kernel: usb 2-1: Manufacturer: GretagMacbeth Feb 18 07:51:05 cray kernel: usb 2-1: configuration #1 chosen from 1 choice and I also see it in /sys/bus/usb/devices:lrwxrwxrwx 1 root root 0 Feb 18 07:51 2-1 -> ../../../devices/pci0000:00/0000:00:1d.1/usb2/2-1 lrwxrwxrwx 1 root root 0 Feb 18 07:51 2-1:1.0 -> ../../../devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1:1.0
But the commands do not seem to be able to use it: # ./dispcal -yl -r The instrument can be removed from the screen. dispcal: Error - dispread failed with 'Instrument Access Failed' # strace ./dispcal -yl -r 2>&1 |egrep open open("/etc/ld.so.cache", O_RDONLY) = 3 open("/lib/libm.so.6", O_RDONLY) = 3 open("/lib/libc.so.6", O_RDONLY) = 3 open("/root/.xauthKkmKNQ", O_RDONLY) = 4 open("/dev/bus/usb", O_RDONLY|O_NONBLOCK|O_LARGEFILE|O_DIRECTORY) = 3 open("/dev/bus/usb", O_RDONLY|O_NONBLOCK|O_LARGEFILE|O_DIRECTORY) = 3 open("/dev/bus/usb/004", O_RDONLY|O_NONBLOCK|O_LARGEFILE|O_DIRECTORY) = 3 open("/dev/bus/usb/004/001", O_RDWR) = 4 open("/dev/bus/usb/004/001", O_RDWR) = 3 open("/dev/bus/usb/003", O_RDONLY|O_NONBLOCK|O_LARGEFILE|O_DIRECTORY) = 3 open("/dev/bus/usb/003/002", O_RDWR) = 4 open("/dev/bus/usb/003/001", O_RDWR) = 4 open("/dev/bus/usb/003/002", O_RDWR) = 3 open("/dev/bus/usb/003/001", O_RDWR) = 3 open("/dev/bus/usb/001", O_RDONLY|O_NONBLOCK|O_LARGEFILE|O_DIRECTORY) = 3 open("/dev/bus/usb/001/001", O_RDWR) = 4 open("/dev/bus/usb/001/001", O_RDWR) = 3 open("/dev/bus/usb/002", O_RDONLY|O_NONBLOCK|O_LARGEFILE|O_DIRECTORY) = 3 open("/dev/bus/usb/002/002", O_RDWR) = 4 open("/dev/bus/usb/002/001", O_RDWR) = 4 open("/dev/bus/usb/002/002", O_RDWR) = 3 open("/dev/bus/usb/002/001", O_RDWR) = 3 Any ideas what to do? lprof also just gives me an error.... thx afx -- Espresso / Cappuccino ist wie Liebe, man muss sich heute die gleiche Mühe geben wie gestern und morgen noch mehr ! Espresso / Cappuccino is like love. You need to put in the same effort today as yesterday and tomorrow even more!