Yves,
If it was my printer, my images, I would want to know is the profile
producing the expected results, other than colorimetrically? If I sent a
Lightness scale, from 0 to 100, through the profile, when I measure the
output, how accurate is it?
You only say "prints too dark"?
/ Roger
-----Original Message-----
From: argyllcms-bounce@xxxxxxxxxxxxx <argyllcms-bounce@xxxxxxxxxxxxx> On
Behalf Of Yves Gauvreau
Sent: Friday, March 18, 2022 11:10 AM
To: argyllcms@xxxxxxxxxxxxx
Subject: [argyllcms] Prints to dark, how to fix this?
Hi,
beside having my screen to bright, which is not, (80cd/m2) are there other
known causes that would cause my print to be to dark?
I have an I1 Pro 2 and I find using I1Profiler, I find it easier when it
comes to printing and measuring the targets. I'd like to know if I could use
the data (and how) from the charts and measures from I1Profiler? But if
needed I'll switch back to Argyll only, no problem.
I have a RGB printer and currently I'm using a 1560 patches target on 13" x
19" paper which works fine for me.
It seems the chart I use as no 100% white or 100% black patches, could this
be the cause?
Any help would be appreciated