[argyllcms] Re: [Possible bug] Calibration during dispcal measurements
- From: Nikolay Pokhilchenko <nikolay_po@xxxxxxx>
- To: argyllcms@xxxxxxxxxxxxx
- Date: Mon, 10 Feb 2014 12:04:57 +0400
10 Feb. 2014, 14:47 +11:00 Graeme Gill wrote:
>Ilya Dedinsky wrote:
>
>Hi,
> thanks for your report.
>
>> During calibration process (iteration 4) dispcal asked me to re-calibrate
>> instrument.
>> Here is dispcal message:
>
>Hmm. There are a couple of bugs here. One is that (currentl) Argyll shouldn't
>ask for instrument calibration during display calibration or profiling. Can
>confirm the bug in dispread. I've tried to read the display of the Android
>device by 1.6.3 dispread in web server mode. Instrument EyeOne Pro. Dispread
>executable was loaded from site. I've tried my own MinGW compilled 1.6.2
>dispread - the same result - it asks a calibration in the middle of display
>reading process.
>The other (as you note) is that it doesn't give you a chance to position
>the instrument back on the display afterwards. Confirming too for dispread.
>While display instrument calibraton was asked and the calibration performed
>the patches continued the changing before I press any key or moved the
>instrument onto the display.
Dispread 1.6.2 by MinGW the same behaviour.
>> Is this behavior is normal, or may be better to pause dispcal until correct
>> re-positioning
>> of the instrument on the screen?
>
>This will be fixed in the next release. Let me know if you need a fix sooner
>than
>that.
>
>Graeme Gill.
>
>
Николай Похильченко
Other related posts:
