Success with the display name :-)
bin/dispcal
Calibrate a Display, Version 2.1.3_beta
Author: Graeme W. Gill, licensed under the AGPL Version 3
Diagnostic: Too few arguments
usage: dispcal [options] outfile
-v [n] Verbose mode
-d n Choose the display from the following list (default 1)
1 = 'Built-in Retina Display, at 0, 0, width 1440, height 900 (Primary
Display)'
On Sat, Feb 13, 2021 at 1:21 AM Graeme Gill <graeme@xxxxxxxxxxxxx> wrote:
Graeme Gill wrote:
Unfortunately I can't easily fix that, since I don't have a system
that has the necessary NSScreen localizedName method to test on.
So I did a little playing around with the code, and it seems that
the example I took the instancesRespondToSelector from had a typo in it,
so I might be able to fix it, but I can't really test it.
Updated <https://www.argyllcms.com/Argyll_dev_src.zip> with fix.
Cheers,
Graeme Gill.