[argyllcms] Re: Other display types
- From: János, Tóth F. <janos666@xxxxxxxxxx>
- To: argyllcms@xxxxxxxxxxxxx
- Date: Sun, 12 Feb 2012 20:54:55 +0100
I think PDP deserves a category.
It's phosphor based and refresh-type like CRT but it pulses much
faster and nowadays the gamut is usually significantly wider than
sRGB. And this gamut can vary between panel families as they often
change the phophor materials.
2012/2/9, Richard Hughes <hughsient@xxxxxxxxx>:
> At the moment, argyllcms seems to support two main display types, CRT
> and LCD. The ColorHug supports mapping different internal ccmx's to
> different display types for a more accurate calibration.
> When writing the ColorHug driver I just mapped CRT to "m-crt", LCD to
> "m-lcd" and left "m-projector" unused. There are also 3 free slots in
> the mapping system used by ColorHug for other display technologies.
>
> Would it make sense to extend the number of display types that
> argyllcms understands? So far I'm thinking about:
>
> * CRT [-yc]
> * Backlit LCD [-yl]
> * LED [-ye?]
> * Projector [-yp?]
>
> Are there any more that are going to have significantly different
> primaries? Ideas welcome. Thanks,
>
> Richard.
>
>
Other related posts:
